▼ Database Type
The database type for the FCS is decided according to the control system configured for the FCS. The different type of database handles different numbers of function blocks.
IMPORTANT
Once a database type is defined, the database type can not be changed.
The types of function blocks and the model names of function blocks corresponding to each types are shown as follows.
Table Function Block Models £
PVI, PVI-DV
PID, PI-HLD, PID-BSW, ONOFF, ONOFF-G, PID-TP, PD-MR, PI-BLEND, PID-STC ONOFF-E, ONOFF-GE
MLD, MLD-PVI, MLD-SW, MC-2, MC-3, MC-2E, MC-3E RATIO, PG-L13, BSETU-2, BSETU-3
VELLIM
SS-H, SS-M, SS-L, AS-H, AS-M, AS-L, SS-DUAL FOUT, FFSUM, XCPL, SPLIT
PTC
ADD, MUL, DIV, AVE
SQRT, EXP, LAG, INTEG, LD, RAMP, LDLAG, DLAY, DLAY-C AVE-M, AVE-C, FUNC-VAR, TPCFL, ASTM1, ASTM2
SW-33, SW-91, DSW-16, DSW-16C, DSET, DSET-PVI
SLCD, SLPC, SLMC, SMST-111, SMST-121, SMRT, SBSD, SLBC, SLCC, STLD FF-AI, FF-DI, FF-CS, FF-PID, FF-RA, FF-AO, FF-DO, FF-OS, FF-SC, FF-IT FF-IS, FF-MDI, FF-MDO, FF-MAI, FF-MAO
SI-1, SI-2, SO-1, SO-2, SIO-11, SIO-12, SIO-21, SIO-22, SIO-12P, SIO-22P
SI-1E, SI-2E, SO-1E, SO-2E, SIO-11E, SIO-12E, SIO-21E, SIO-22E, SIO-12PE, SIO-22PE
CALCU, CALCU-C
INDST2, INDST2S, INDST3, PBS5C, PBS10C, BSI, HAS3C AND, OR, NOT, SRS1-S, SRS1-R, SRS2-S, SRS2-R
WOUT, OND, OFFD, TON, TOFF, GT, GE, EQ, BAND, BOR, BNOT ALM-R, RL, RS, VLVM
_SFCSW, _SFCPB, _SFCAS
BDSET-1L, BDSET-1C, BDSET-2L, BDSET-2C, BDA-L, BDA-C
_UTSW, _UTPB, _UTAS _UTSW-N, _UTPB-N, _UTAS-N OPSBL, OPSFC
OPSFCP1, OPSFCP2, OPSFCP3, OPSFCP4, OPSFCP5
F010407E.EPS
ST16, ST16E, LC64
TM, CTS, CTP, CI, CO
Block type Function block models
Regulatory control/ Sequence Elements 1
Logic operation Sequence Elements 2 Batch data
*1: £ The blocks only supported in RFCS2. Even though the function block may appear on menu of builders in all types of FCS database, however, a generation error occurs except for RFCS2.
F1-60
<F1.4 Project Devices Configuration>
● FCS Database Types Selectable in the SFCS : SFCS £
The following table lists the application capacities for the FCS database types for the SFCS:
Table FCS Database Types : SFCS £
Element for each station (*1) 2000 2000 2000 2000 2000
Function block/element for
each area (*2) 2500 2500 2500 2500 2500
Node 1 1 1 1 1
Common Switch 4000 4000 4000 4000 4000
Communication I/O 4000 4000 4000 4000 4000
Annunciator 500 500 500 500 500
Batch Event 200 200 200 200 200
Printing Message 200 200 200 200 200
Drawing 200 200 200 200 200
Regulatory control /
Calculation 250 1500 200 200 200
150 60 60 120 80
Sequence
250 150 1500 200 200
Sequence Elements 1 Switch Instruments
120 60 60 80 80
General-purpose Calculations Faceplate
Logic operation Sequence Elements 2 Batch Data
60 60 60 30 30
SFC block 10 0 0 10 10
Operation 0 0 0 150 150
Unit Supervision Offsite
Valve pattern monitor
0 0 0 20 20
200 200 200 250 250
1 sec./10 sec. trend 256 256 256 256 256
ADL 160 160 160 160 160
SEBOL user function
10 0 0 100 100
FCS simultaneous execution SEBOL daemon
0 0 0 40 40
Recipe area 0 0 0 0 1 Mbyte
User C / Option area 500 Kbyte 500 Kbyte 500 Kbyte 500 Kbyte 500 Kbyte
Global Switch 256 256 256 256 256
Operator Guide 200 200 200 200 200
F010408E.EPS
0 0 0 0 0
Sequence (M-size)
0 0 0 0 0
Sequence (L-size)
*1: The element for each station indicates the total number of the tag names that may be assigned to contact I/O (%Z), common switches (%SW), global switches (%GS), and communication I/O (%WB).
*2: The function block/element for each area indicates the total number of the tag names that may be assigned to function
F1-61
<F1.4 Project Devices Configuration>
● FCS Database Types Selectable in the LFCS : LFCS £
The following table lists the application capacities for the FCS database types for the LFCS:
Table FCS Database Types (1/3) : LFCS £ Element for each station (*1)
Function block/element for each area (*2) Regulatory control / Calculation
Sequence
Sequence Elements 1 Switch Instruments
400 General-purpose Calculations
Faceplate Logic operation Sequence Elements 2 Batch Data
SFC block Operation Unit Instruments Offsite
Valve pattern monitor 1 sec./10 sec. trend ADL
SEBOL user function
10 SFC simultaneous execution
SEBOL daemon
Recipe area User C / Option area
Global Switch 256
0
Operator Guide 200 200 200 200 200
550
F1-62
<F1.4 Project Devices Configuration>
Table FCS Database Types (2/3) : LFCS £
F010410E.EPS
Element for each station (*1) Function block/element for each area (*2)
Regulatory control / Calculation Sequence
Sequence Elements 1 Switch Instruments
General-purpose Calculations Faceplate
Logic operation Sequence Elements 2 Batch Data
SFC block Operation Unit Instruments Offsite
Valve pattern monitor 1 sec./10 sec. trend ADL
SEBOL user function SFC simultaneous execution SEBOL daemon
Recipe area User C / Option area Global Switch
Operator Guide 200 200 200 200
600
*1: The element for each station indicates the total number of the tag names that may be assigned to contact I/O (%Z), common switches (%SW), global switches (%GS), and communication I/O (%WB).
*2: The function block/element for each area indicates the total number of the tag names that may be assigned to function
F1-63
<F1.4 Project Devices Configuration>
Table FCS Database Types (3/3) : LFCS £
64 Kbyte 64 Kbyte
F010416E.EPS
Element for each station (*1)
Function block/element for each area (*2) Node
Regulatory control / Calculation Sequence
Sequence Elements 1 Switch Instruments
General-purpose Calculations Faceplate
Logic operation Sequence Elements 2 Batch Data
SFC block Operation Unit Instruments Offsite
Valve pattern monitor 1 sec./10 sec. trend ADL
SEBOL user function SFC simultaneous execution SEBOL daemon
Recipe area User C / Option area
256 256
Operator Guide 200
250
*1: The element for each station indicates the total number of the tag names that may be assigned to contact I/O (%Z), common switches (%SW), global switches (%GS), and communication I/O (%WB).
*2: The function block/element for each area indicates the total number of the tag names that may be assigned to function blocks and annunciators (%AN).
F1-64
<F1.4 Project Devices Configuration>
● FCS Database Types Selectable in the LFCS2 : LFCS2 £
The following table lists the application capacities for the FCS database types for the LFCS2:
Element for each station (*1)
Function block/element for each area (*2) Node
Regulatory control / Calculation Sequence
Sequence Elements 1 Switch Instruments
General-purpose Calculations Faceplate
Logic operation Sequence Elements 2 Batch Data
SFC block Operation Unit Instruments Offsite
Valve pattern monitor 1 sec./10 sec. trend ADL
SEBOL user function SFC simultaneous execution SEBOL daemon
Recipe area User C / Option area
256
Operator Guide 500
1200
*1: The element for each station indicates the total number of the tag names that may be assigned to contact I/O (%Z), common switches (%SW), global switches (%GS), and communication I/O (%WB).
*2: The function block/element for each area indicates the total number of the tag names that may be assigned to function blocks and annunciators (%AN).
F1-65
<F1.4 Project Devices Configuration>
● FCS Database Types Selectable in the KFCS : KFCS £
The following table lists the application capacities for the FCS database types for the KFCS:
Element for each station (*1)
Function block/element for each area (*2) Regulatory control / Calculation (*4)
Sequence
Sequence Elements 1 Switch Instruments
400 200
General-purpose Calculations Faceplate
Logic operation Sequence Elements 2 Batch Data
SFC block Operation Unit Instruments Offsite
Valve pattern monitor
Global Switch 256 256
0 0
Number of ALF111 installation Number of ALR111, ALR121, ALE111, and ALP111 installation (*3)
16 16 16
16
6 6 6 6 6 6
200 200
Operator Guide 200 200 200 200
550
64 Kbyte 64 Kbyte
1 sec./10 sec. trend ADL
SEBOL user function
10 80
SFC simultaneous execution SEBOL daemon
Recipe area User C / Option area
0
F1-66
<F1.4 Project Devices Configuration>
Table FCS Database Types (2/3) : KFCS £
Element for each station (*1)
Function block/element for each area (*2) Node
Regulatory control / Calculation (*4) Sequence
Sequence Elements 1 Switch Instruments
General-purpose Calculations Faceplate
Logic operation Sequence Elements 2
Batch Data SFC block Operation Unit Instruments Offsite
Valve pattern monitor 1 sec./10 sec. trend ADL
SEBOL user function SFC simultaneous execution SEBOL daemon
Recipe area User C / Option area
256
Number of ALF111 installation 16 2 2
Number of ALR111, ALR121,
ALE111, and ALP111 installation (*3) 6 6 6 6
200
Operator Guide 200 200 200
600
*1: The element for each station indicates the total number of the tag names that may be assigned to contact I/O (%Z), common switches (%SW), global switches (%GS), and communication I/O (%WB).
*2: The function block/element for each area indicates the total number of the tag names that may be assigned to function
F1-67
<F1.4 Project Devices Configuration>
Table FCS Database Types (3/3) : KFCS £
450 200 200
600 600
64 Kbyte 64 Kbyte
F010421E.EPS
Element for each station (*1)
Function block/element for each area (*2) Node
Regulatory control / Calculation (*4) Sequence
Sequence Elements 1 Switch Instruments
General-purpose Calculations Faceplate
Logic operation Sequence Elements 2 Batch Data
SFC block Operation Unit Instruments Offsite
Valve pattern monitor 1 sec./10 sec. trend ADL
SEBOL user function SFC simultaneous execution SEBOL daemon
Recipe area User C / Option area
256 256
Number of ALF111 installation 2
6 6 6
Number of ALR111, ALR121,
ALE111, and ALP111 installation (*3) 6
200 200
Operator Guide 200
250
*1: The element for each station indicates the total number of the tag names that may be assigned to contact I/O (%Z),
F1-68
<F1.4 Project Devices Configuration>
● FCS Database Types Selectable in the KFCS2 : KFCS2 £
The following table lists the application capacities for the FCS database types for the KFCS:
Element for each station (*1)
Function block/element for each area (*2) Node Regulatory control / Calculation (*4)
Sequence
Sequence Elements 1 Switch Instruments
500 General-purpose Calculations
Faceplate Logic operation Sequence Elements 2 Batch Data
SFC block Operation Unit Instruments Offsite
Valve pattern monitor 1 sec./10 sec. trend ADL
SEBOL user function
150 SFC simultaneous execution
SEBOL daemon
Recipe area User C / Option area
Global Switch 256
Sequence (M-size) 0
0 Sequence (L-size)
200 Migration
Migration Remote Node Expanded 5800
Operator Guide 500
1200 Remote Node Expanded
5800
Number of ALF111 installation 16 32
Number of ALR111, ALR121, 16
ALE111, and ALP111 installation (*3) 16 16
500
*1: The element for each station indicates the total number of the tag names that may be assigned to contact I/O (%Z), common switches (%SW), global switches (%GS), and communication I/O (%WB).
*2: The function block/element for each area indicates the total number of the tag names that may be assigned to function
F1-69
<F1.4 Project Devices Configuration>