Host Section

The contents of this Quick Connect Tab section:

will depend on the Communication Profile Section selected Communication Profile Communication

Device type:

· Networking

· Point-to-Point or Gateway

· Network Point-to-Point

· Infrared

3.4.4.2.1.1 Networking

If in the Communication Profile Section you select a Communication Profile that uses a Networking Communication Device (NetBIOS (including RemPCNB v. 4.3), IPX (including RemPCIPX v. 4.3), TCP/IP, WebConnect or Terminal Server), the Host Section will have these contents:

Note: To connect or browse by multiple networking Communication Profiles, enable them at Guest loading and select <Any initialized communication>.

Name: []: To Connect, specify in the field of this drop-down box a name or address that is enabled on the Host, see NetBIOS Settings, IPX Settings, TCP/IP Settings or Terminal Server Settings. To Browse for Hosts, specify any number of Host name beginning characters to request that Hosts whose name begins with these characters respond. The drop-down box list will contain Host names or addresses that have been specified before. Select a name or address in the list to show it in the field.

Note: Netop will interpret the Name drop-down box field name according to the default Host name qualifier or a prefixed Host name qualifier, see the Program Options window Host Name Tab.

3.4.4.2.1.2 Point-to-Point or Gateway

If in the Communication Profile Section you select a Communication Profile that uses a Point-to-Point ( ISDN (CAPI), Serial or Windows Modem) or Gateway Communication Device, the Host Section will have these contents:

If you connect by Point-to-Point communication directly to a Host:

- specify in the Phone number drop-down box field the Host computer modem telephone number and leave the Name drop-down box field empty.

If you connect by Gateway communication through a Guest network Netop Gateway that connects by Point-to-Point or Network Point-to-Point communication to a Host:

- specify in the Phone number drop-down box field the Host computer modem telephone number if using point-to-point communication or IP address if using network point-to-point communication and leave the Name drop-down box field empty.

If you connect by Point-to-Point communication to a Host network Netop Gateway that connects to a network computer Host:

- specify in the Phone number drop-down box field the Host network Netop Gateway computer modem telephone number and optionally specify in the Name drop-down box field the Host name, see Gateway Connection.

If you connect by Gateway communication through a Guest network Netop Gateway that connects by Point-to-Point or Network Point-to-Point communication to a Host network Netop Gateway that connects to a network computer Host:

- specify in the Phone number drop-down box field the Host network Netop Gateway computer modem telephone number if using Point-to-Point communication or IP address if using Network Point-to-Point communication and optionally specify in the Name drop-down box field the Host name, see Gateway Connection.

The drop-down box lists will contain telephone numbers, IP addresses and Host names that have been specified before. Select a list entry to show it in the field.

Note: Netop will interpret the Name drop-down box field Host name according to the default Host name qualifier or a prefixed Host name qualifier, see the Program Options window Host Name Tab.

3.4.4.2.1.3 Network Point-to-Point

If in the Communication Profile Section you select a Communication Profile that uses a Network Point-to-Point Communication Device (TCP/IP (TCP), TCP/IP (TCP IPv6)), the Host Section will have these contents:

If you connect directly to a Host, specify in the IP Address drop-down box field the Host computer IP address and leave the Name drop-down box field empty.

If you connect by Network Point-to-Point communication to a Host network Netop Gateway that

connects to a network computer Host, specify in the IP Address drop-down box field the Netop Gateway computer IP address and optionally specify in the Name drop-down box field the Host name, see Gateway Connection.

The drop-down box lists will contain IP addresses and Host names that have been specified before.

Select a list entry to show it in the field.

Note: Netop will interpret the Name drop-down box field name according to the default Host name qualifier or a prefixed Host name qualifier, see the Program Options window Host Name Tab.

3.4.4.2.1.4 Infrared

If in the Communication Profile Section you select a Communication Profile that uses the Infrared (IrDA) Communication Device, the Host Section will have these contents:

If you connect directly to a Host, leave the Name drop-down box field empty.

If you connect by infrared communication to a Host network Netop Gateway that connects to a network computer Host, optionally specify in the Name drop-down box field the Host name, see Gateway Connection.

The drop-down box list will contain Host names that have been specified before. Select a name in the list to show it in the field.

Note: Netop will interpret the Name drop-down box field name according to the default Host name qualifier or a prefixed Host name qualifier, see the Program Options window Host Name Tab.

3.4.4.2.1.5 Gateway Connection

If you connect by Point-to-Point or Gateway, Network Point-to-Point or Infrared communication to a Host network Netop Gateway without specifying a Host name in the Host Section Name drop-down box field, this window will be shown when connected to the Host network Netop Gateway:

Select one of these options:

¤ Remote Control Gateway: Connect to the Gateway (default selection).

¡ Connect to specific Host: []: Specify in the field a Host network Host name to connect to the Host.

¡ Browse for Hosts: []: Leave the field empty or specify any number of Host name first characters to Browse for Hosts on the Host network.