PROGRAMME : ELECTRONIC TECHNOLOGY
8. PREVENTIVE ANTENNA MAINTENANCE
8.1 Obtain and prepare preventive maintenance schedule.
8.1.1 Identify the preventive maintenance schedule requirements from various types of antenna and accessories with appropriate partition by location inspection.
8.1.2 Identify the work plan resources required to satisfy obtained and inspected for compliance with the preventive job specifications
8.1.3 Identify the types of antenna, accessories drawings and texts selected interpreted in accordance with the maintenance work plan
8.1.4 Identify correct size, type and quantity of materials and components obtained and inspect for compliance with the job specifications
8.1.5 Acquire preventive maintenance schedule according to antenna system requirements.
8.1.6 Practice the safety procedures according to manufacturers ‘specifications.
8.2 Carry out antenna system
preventive maintenance activities
8.2.1 Perform inspection on installed antenna system according to manufacture specification.
8.2.2 Carry out antenna system maintenance according to the work plan.
8.2.3 Perform adjustments antenna system according to manufacture specification.
8.2.4 Practice the safety procedures according to manufacturers ‘specifications.
8.3 Test for serviceability. 8.3.1 Identify the consumer control function for functional test according to operation manual.
8.3.2 Perform the functionality test of antenna system according to safety requirement.
8.3.3 Carry out personnel and equipment safety practice according to safety requirement.
ITEM ABILITIES 01 LOCATE AND PROCESS INFORMATION 01.01 Identify and gather information
01.02 Document information, procedures or processes 01.03 Utilize basic IT applications
02 EXCHANGE/COMMUNICATE INFORMATION 02.01 Interpret and follow manuals, instructions and SOP’s 02.02 Follow telephone/ telecommunication procedures 02.03 Communicate clearly
02.04 Prepare brief reports and checklists using standard forms 02.05 Read/interpret flowcharts and pictorial information
03 WORK AND INTERACT WITH PEOPLE 03.01 Apply cultural requirements to the workplace 03.02 Demonstrate integrity and apply ethical practices 03.03 Accept responsibility for own work and work area
03.04 Seek and act constructively upon feedback about performance 03.05 Demonstrate safety skills
03.06 Respond appropriately to people and situations 03.07 Resolve interpersonal conflicts
06 WORK WITHIN AND WITH SYSTEM 06.01 Understand systems
06.02 Comply with and follow chain of command 06.03 Identify and highlight problems
06.04 Adapt competencies to new situations / systems
MINISTRY OF EDUCATION, MALAYSIA MODULE INFORMATION
CONFIDENTIAL
MODULE : AUDIO AND VIDEO SYSTEM INSTALLATION
CODE : CEEN 207
LEVEL : 1 SEMESTER 2
CREDIT UNIT : 2.0
CONTACT HOUR : 4.0 HOURS / WEEK
MODULE STATUS : VOCATIONAL
PREREQUISITE : CEEN103 – FUNDAMENTAL OF TEST INSTRUMENT CEEN104 – PRINCIPLES OF ELECTRICAL ENGINEERING CEEN105 – PRINCIPLES OF ELECTRONICS ENGINEERING
At the end of the course, the students should be able to:-
Perform audio and video system installation
Test for serviceability of audio and video system installation
Identify and perform consumer control key function
Choose correct cable
Connect cable and connectors of the audio and video system
Plan and prepare for installation audio and video system
Interpret and follow manuals and instructions
Apply safety requirement.
MODULE DESCRIPTION
This module covers audio and video system installation. Student should be able to set up and test for serviceability, perform consumer control key function, connect cable and connectors of the audio and video system according to manufacture standard procedure.
CONTENT AND LEARNING STANDARDS
COURSE : ELECTRONIC TECHNOLOGY
MODULE : 7 (AUDIO AND VIDEO SYSTEM INSTALLATION)
CODE : CEEN 207
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
1. PLAN AND PREPARE HI- FI INSTALLATION
1.1 Plan and prepare for installation HI-FI system.
1.1.1 Identify the Hi-fi components item according to operation manual specification.
1.1.2 Identify the Hi-fi component interface and polarity according to hi-fi system requirement.
1.1.3 Select the Hi-fi component at suitable location according operation manual.
1.1.4 Arrange the Hi-fi system component interface according operation manual.
1.2 Carry out HI-FI system installation. 1.2.1 Identify the types of cable coded and Hi-fi system component item connection according to operation manual.
1.2.2 Identify polarity and Perform correct connection of the
1.2.4 Perform the Hi-fi component interface connection to layout wiring diagram.
1.2.5 Identify the correct interface termination according to termination colour code.
1.2.6 Perform the proper cable layout for minimum distortion according to instruction manual.
1.3 Test for serviceability. 1.3.1 Identify the consumer control function for functional test according to operation manual.
1.3.2 Perform functionality test on hi-fi system.
1.3.3 Carry out personnel and equipment safety practice according to safety requirement.
CONTENT AND LEARNING STANDARDS
COURSE : ELECTRONIC TECHNOLOGY
MODULE : 7 (AUDIO AND VIDEO SYSTEM INSTALLATION)
CODE : CEEN 207
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
2. PLAN AND PREPARE PUBLIC ADDRESS INSTALLATION
2.1 Plan and prepare for installation of public address system.
2.1.1 Identify the public address systems component items according to operation manual specification.
2.1.2 Identify the public address system component interface and polarity according to public address system
requirement.
2.1.3 Identify the type of speaker according to public address system requirement.
2.1.4 Identify the type of microphone according to public address system requirement.
2.2 Carry out public address system installation.
2.2.1 Identify the type of cable coded and public address system component item connection according to operation manual.
2.2.3 Draw wiring diagram according to public address system inter face requirement.
2.2.4 Perform the public address system component interface connection to layout wiring diagram.
2.2.5 Identify the correct interface termination according to termination color code.
2.2.6 Perform proper cable layout for minimum distortion according to instruction manual.
2.3 Test for serviceability. 2.3.1 Identify the consumer control function for functional test according to operation manual.
2.3.2 Perform the functionality test of public address system.
2.3.3 Execute personal and equipment safety practice according to safety equipment.
CONTENT AND LEARNING STANDARDS
COURSE : ELECTRONIC TECHNOLOGY
MODULE : 7 (AUDIO AND VIDEO SYSTEM INSTALLATION)
CODE : CEEN 207
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
3. PLAN AND PREPARE AUDIO CONFERENCE SYSTEM
3.1 Plan and prepare for installation of audio conference system
installation.
3.1.1 Identify the audio conference system component item according to operation manual specification.
3.1.2 Identify audio conference system component interface and polarity according to audio conference system requirement.
3.1.3 Identify the type of speaker according to audio conference system requirement.
3.1.4 Identify type of microphone according to audio conference system requirement.
3.2 Carry out audio conference system installation.
3.2.1 Identify the type of cable coded and audio conference system component item connection according to operation manual.
the system according to operation manual.
3.2.3 Draw the layout connecting wiring diagram according to audio conference system inter face equipments.
3.2.4 Perform public address system component interface connection to layout wring diagram.
3.2.5 Identify the correct interface termination according to termination colour code.
3.2.6 Perform the proper cable layout for minimum distortion according to instruction manual.
3.3 Test for serviceability. 3.3.1 Identify the consumer control function for functional test according to operation manual.
3.3.2 Perform the functionality test of audio conference system.
3.3.3 Execute personal and equipment safety practice according to safety requirement.
CONTENT AND LEARNING STANDARDS
PROGRAMME : ELECTRONIC TECHNOLOGY
MODULE : 7 (AUDIO AND VIDEO SYSTEM INSTALLATION)
CODE : CEEN 207
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
4. PLAN AND PREPARE TELEVISION SYSTEM
4.1 Plan and prepare for television system installation.
4.1.1 Identify television system according to operation manual specification.
4.1.2 Identify the correct location for television system according to operation manual.
4.1.3 Select the correct antenna according location.
4.2 Carry out television system installation.
4.2.1 Identify the type of antenna system according to operation manual
4.2.2 Identify the polarity and perform correct cable of the system according to operation manual.
4.2.3 Draw the layout connecting wiring diagram according
4.2.4 Perform the television system interface connection to layout wiring diagram.
4.2.5 Verify the correct interface termination according to termination color code.
4.2.6 Perform the proper cable layout for minimum distortion according to instruction manual
4.3 Test for serviceability. 4.3.1 Identify the consumer control function for test according to operation manual.
4.3.2 Perform the functionality test of television system.
4.3.3 Execute personal and equipment safety practice according to safety requirement.
CONTENT AND LEARNING STANDARDS
COURSE : ELECTRONIC TECHNOLOGY
MODULE : 7 (AUDIO AND VIDEO SYSTEM INSTALLATION)
CODE : CEEN 207
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
5. SELECT LOCATION CCTV SYSTEM INSTALLATION
5.1 Select location for the close circuit television system.
5.1.1 Identify the close circuit television (CCTV) systems according to operation manual specification.
5.1.2 Identify the networking system according to close circuit television (CCTV) systems requirement.
5.1.3 Identify the correct location for close circuit television (CCTV) systems according to location requirement.
5.2 Connect the cable and connectors of the system.
5.2.1 Identify the type of cable according to operation manual.
5.2.2 Identify the polarity and perform correct cable of the system according to operation manual.
5.2.4 Perform the close circuit television (CCTV) systems interface connection to layout wiring diagram.
5.2.5 Verify the correct interface termination according to termination colour code.
5.2.6 Perform the proper cable layout for minimum distortion according to instruction manual.
5.3 Test for serviceability. 5.3.1 Identify the consumer control function for functional test according to operation manual.
5.3.2 Perform the functionality test of close circuit television (CCTV) systems.
5.3.3 Carry out personnel and equipment safety practice according to safety requirement.
CONTENT AND LEARNING STANDARDS
COURSE : ELECTRONIC TECHNOLOGY
MODULE : 7 (AUDIO AND VIDEO SYSTEM INSTALLATION)
CODE : CEEN 207
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
6. IDENTIFY MULTIMEDIA EQUIPMENT INSTALLATION
6.1 Identify multimedia equipment. 6.1.1 Identify the multimedia equipment according to operation manual specification.
6.1.2 Interpret the multimedia equipment according to operation manual specification.
6.1.3 Identify the methods of termination according to operation manual.
6.2 Connect the cable of the equipment.
6.2.1 Identify the types of cable according to operation manual.
6.2.2 Identify the polarity and perform correct cable of the system according to operation manual.
6.2.4 Perform the multimedia equipment interface connection to layout wiring diagram.
6.2.5 Verify the correct interface termination according to termination colour code.
6.2.6 Perform proper cable layout for minimum distortion according to instruction manual.
6.3 Test for serviceability. 6.3.1 Identify the consumer control function for functional test according to operation manual.
6.3.2 Perform the functionality test of multimedia equipment.
6.3.3 Carry out personnel and equipment safety practice according to safety requirement.
CONTENT AND LEARNING STANDARDS
COURSE : ELECTRONIC TECHNOLOGY
MODULE : 7 (AUDIO AND VIDEO SYSTEM INSTALLATION)
CODE : CEEN 207
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
7. IDENTIFY DVD PLAYER INSTALLATION
7.1 Identify DVD player equipment. 7.1.1 Identify the DVD player equipment according to operation manual specification.
7.1.2 Interpret the DVD player equipment according to operation manual specification.
7.1.3 Identify the methods of termination according to operation manual.
7.2 Connect the cable of the equipment.
7.2.1 Identify the type of cable according to operation manual.
7.2.2 Identify the polarity and perform correct cable of the system according to operation manual.
7.2.4 Perform the DVD player equipment interface connection to layout wring diagram.
7.2.5 Verify the correct interface termination according to termination colour code.
7.2.6 Perform the proper cable layout for minimum distortion according to instruction manual.
7.3 Test for serviceability. 7.3.1 Identify the consumer control function for functional test according to operation manual.
7.3.2 Perform the functionality test of DVD player equipment Carry out personnel and equipment safety practice according to safety requirement.
7.3.3 Carry out personnel and equipment safety practice according to safety requirement.
CONTENT AND LEARNING STANDARDS
COURSE : ELECTRONIC TECHNOLOGY
MODULE : 7 (AUDIO AND VIDEO SYSTEM INSTALLATION)
CODE : CEEN 207
CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA
8. PREVENTIVE ANTENNA MAINTENANCE
8.1 Obtain and prepare preventive maintenance schedule.
8.1.1 Identify the preventive maintenance schedule requirements from various types of antenna and accessories with appropriate partition by location inspection.
8.1.2 Identify the work plan resources required to satisfy obtained and inspected for compliance with the preventive job specifications
8.1.3 Identify the types of antenna, accessories drawings and texts selected interpreted in accordance with the maintenance work plan
8.1.4 Identify correct size, type and quantity of materials and components obtained and inspect for compliance with
8.1.5 Acquire preventive maintenance schedule according to antenna system requirements.
8.1.6 Practice the safety procedures according to manufacturers ‘specifications.
8.2 Carry out antenna system
preventive maintenance activities
8.2.1 Perform inspection on installed antenna system according to manufacture specification.
8.2.2 Carry out antenna system maintenance according to the work plan.
8.2.3 Perform adjustments antenna system according to manufacture specification.
8.2.4 Practice the safety procedures according to manufacturers ‘specifications.
8.3 Test for serviceability. 8.3.1 Identify the consumer control function for functional test according to operation manual.
8.3.2 Perform the functionality test of antenna system according to safety requirement.
8.3.3 Carry out personnel and equipment safety practice according to safety requirement.
CORE ABILITY
ITEM ABILITIES
01 LOCATE AND PROCESS INFORMATION 01.01 Identify and gather information
01.02 Document information, procedures or processes 01.03 Utilize basic IT applications
02 EXCHANGE/COMMUNICATE INFORMATION 02.01 Interpret and follow manuals, instructions and SOP’s 02.02 Follow telephone/ telecommunication procedures 02.03 Communicate clearly
02.04 Prepare brief reports and checklists using standard forms 02.05 Read/interpret flowcharts and pictorial information
03 WORK AND INTERACT WITH PEOPLE 03.01 Apply cultural requirements to the workplace 03.02 Demonstrate integrity and apply ethical practices 03.03 Accept responsibility for own work and work area
03.04 Seek and act constructively upon feedback about performance 03.05 Demonstrate safety skills
03.06 Respond appropriately to people and situations 03.07 Resolve interpersonal conflicts
06 WORK WITHIN AND WITH SYSTEM 06.01 Understand systems
MODULE INFORMATION
CONFIDENTIAL