Analysis and design methods Abbas, Ali A.; Mohsin, Sharifah M.
Syed; Cotsovos, Demetrios M.:
Non-linear analysis of statically indeterminate SFRC columns [fibre-reinforced concrete; finite element methods; structural
analysis] Issue 1 94–105
Aboutalebi, Morteza; Alani, Amir M.; Rizzuto, Joseph; Beckett, Derrick: Structural behaviour and deformation patterns in loaded plain concrete ground-supported slabs [ground-sup-ported slab; displacement; crack
propagation; bending; punching] Issue 1 81–93 Alani, Amir M.; Aboutalebi,
Morteza; Kilic, Gokhan: Use of non-contact sensors (IBIS-S) and finite element methods in the assessment of bridge deck structures [finite element model-ling; bridge health monitoring;
IBIS-S sensor; ANSYS] Issue 2 240–247 Belletti, Beatrice; Damoni, Cecilia;
Hendriks, Max A. N.; de Boer, Ane: Analytical and numerical evaluation of the design shear resistance of reinforced con-crete slabs [reinforced concon-crete slabs; non-linear finite element analysis; shear resistance evalua-tion; guidelines; safety formats;
design] Issue 3 317–330
Breitenbücher, Rolf; Meschke, Günther; Song, Fanbing; Zhan, Yijian: Experimental, analytical and numerical analysis of the pullout behaviour of steel fibres considering different fibre types, inclinations and concrete strengths [steel fibre;
pullout behaviour; laboratory test; analytical modelling;
numerical simulation] Issue 2 126–135 Castel, Arnaud; Gilbert, Raymond
Ian: Influence of time-depend-ent effects on the crack spacing in reinforced concrete beams [reinforced concrete; crack spac-ing; shrinkage; sustained load-ing; stirrup spacload-ing; fib Model
Code 2010] Issue 3 373–379
Cervenka, Vladimir; Ganz, Hans Rudolf: Validation of post-ten-sioning anchorage zones by laboratory testing and numeri-cal simulation [anchorage;
numerical analysis; testing] Issue 2 258–268 Fan, Yuhui; Xiao, Jianzhuang;
Tam, Vivian W. Y.: Effect of old attached mortar on the creep of recycled aggregate concrete
[recycled aggregate concrete; old adhering mortar; shrinkage;
creep; influence mechanism] Issue 2 169–178 Gama, David; Almeida, João F.:
Concrete integral abutment bridges with reinforced con-crete piles [prestressed concon-crete bridges; integral abutment bridges; reinforced concrete piles; imposed deformations;
soil-structure interaction; levels
of approximation] Issue 3 292–304 Gupta, Pramod K.; Ahuja, Ashok
K.; Khaudhair, Ziyad A.: Model-ling, verification and investiga-tion of behaviour of circular CFST columns [concrete-filled tube; CFST column; simulation;
CFT; composite columns; con-finement; confined concrete;
cir-cular columns] Issue 3 340–349
Liu, Xian; Jiang, Wei; De Schutter, Geert; Yuan, Yong; Su, Quanke:
Early-age behaviour of precast concrete immersed tunnel based on degree of hydration concept [precast immersed tun-nel; early-age cracking; degree of hydration; creep under varying
stress levels] Issue 1 66–80
Liu, Xian; Yuan, Yong; Su, Quanke: Sensitivity analysis of the early-age cracking risk in an immersed tunnel [immersed tunnel; early-age cracking;
sensi-tivity analysis; curing scheme] Issue 2 179–190 Magnusson, Johan; Hallgren,
Mikael; Ansell, Anders: Shear in concrete structures subjected to dynamic loads [dynamic loads;
impulsive loads; rise time; shear;
initial response; support
reac-tions; arch action] Issue 1 55–65 Nyhus, Bente Skovseth: Consistent
practical design of concrete structures [concrete design;
practical design; consistent stiff-ness method; non-linear analy-sis; shear design; MCFT; safety;
cost effective] Issue 3 305–316
Onysyk, Jerzy; Biliszczuk, Jan;
Prabucki, Przemyslaw; Sadow -ski, Krzysztof; Toczkiewicz, Robert: Strengthening the 100-year-old reinforced concrete dome of the Centennial Hall in Wrocław [pioneering concrete structure; renovation; FEM
analysis; strengthening] Issue 1 30–37 Podroužek, Jan; Strauss, Alfred;
Bergmeister, Konrad: Robust-ness-based performance assess-ment of a prestressed concrete bridge [robustness; existing
Annual table of contents 2014 structure; reliability;
perform-ance indicators; safety;
stochas-tic methods] Issue 2 248–257
Randl, Norbert; Kunz, Jakob: Post-installed reinforcement connec-tions at ultimate and servicea-bility limit states [post-installed reinforcement; anchorage; split-ting; pullout; serviceability limit
state] Issue 4 563–574
Reinhardt, Hans-Wolf: Aspects of imposed deformation in con-crete structures – a condensed overview [imposed deformation;
fresh concrete; shrinkage; young
concrete; cracking] Issue 4 454–460 Scott, Richard: Serviceability
uncertainties in flat slabs [load tests; finite element analysis;
codes of practice] Issue 4 469–483 Siburg, Carsten; Ricker, Marcus;
Hegger, Josef: Punching shear design of footings: critical review of different code provi-sions [punching; footing; fib Model Code 2010; Eurocode 2;
tests] Issue 4 497–508
Souza, Osvaldo Luiz de Carvalho;
Sánchez Filho, Emil de Souza;
Vaz, Luiz Eloy; Silva Filho, Júlio Jerônimo Holtz: Reliability analysis of RC beams strength-ened for torsion with carbon fibre composites [reliability index; torsion in RC beams;
car-bon fibre composites] Issue 1 38–44 Van Coile, Ruben; Caspeele,
Robby; Taerwe, Luc: Towards a reliability-based post-fire assessment method for con-crete slabs incorporating infor-mation from inspection [fire;
post-fire assessment; residual strength; safety level; concrete
slab] Issue 3 395–407
Vicente, Miguel A.; González, Dorys C.; Mínguez, Jesús;
Martínez, José A.: Residual modulus of elasticity and maxi-mum compressive strain in HSC and FRHSC after high-stress-level cyclic loading [fatigue; high-strength concrete;
fibre-reinforced high-strength concrete; modulus of elasticity;
maximum compressive strain] Issue 2 210–218 Völgyi, István; Windisch, Andor:
Resistance of reinforced con-crete members with hollow cir-cular cross-section under com-bined bending and shear – Part II: New calculation model [behaviour under combined bending and shear; hollow circu-lar cross-section; contribution of compressed concrete to shear
resistance; sliding surface] Issue 1 21–29 Winkler, Karsten; Mark, Peter;
Heek, Peter; Rohländer, Sandra;
Sommer, Simone: Punching shear tests on symmetrically reduced slab quarters [punching shear; innovative test setup; axis symmetry; experiments;
quar-tered slab] Issue 4 484–496
Anchorage
Cairns, John: Staggered lap joints for tension reinforcement
[lapped joints; bond; detailing] Issue 1 45–54 Cervenka, Vladimir; Ganz, Hans
Rudolf: Validation of post-ten-sioning anchorage zones by laboratory testing and numeri-cal simulation [anchorage;
numerical analysis; testing] Issue 2 258–268 Hertz, Kristian; Castberg, Andreas;
Christensen, Jacob: Super-light concrete decks for building floor slabs [super-light struc-tures; deck strucstruc-tures; precast concrete; lightweight concrete;
prestressed concrete; structural design; testing structural
ele-ments] Issue 4 522–529
Mancini, Giuseppe; Tondolo, Francesco: Effect of bond degradation due to corrosion – a literature survey [bond degra-dation; corrosion rate;
experi-mental procedure] Issue 3 408–418 Prince, M. John Robert; Singh,
Bhupinder: Investigation of bond behaviour between recy-cled aggregate concrete and deformed steel bars [coarse recycled concrete aggregate;
replacement percentage; natural coarse aggregate; bond; pullout failure; splitting failure;
normal-ized bond strength] Issue 2 154–168 Randl, Norbert; Kunz, Jakob:
Post-installed reinforcement connec-tions at ultimate and servicea-bility limit states [post-installed reinforcement; anchorage; split-ting; pullout; serviceability limit
state] Issue 4 563–574
Art of engineering
Dahl, Kaare K. B.: Bella Sky Hotel – taking precast concrete to the limit [precast concrete; structur-al behaviour; hotel; complex
geometry; leaning building] Issue 4 441–447 Kollegger, Johann; Foremniak,
Sara; Suza, Dominik; Wimmer, David; Gmainer, Susanne:
Building bridges using the bal-anced lift method [precast con-crete elements; post-tensioning;
bridge construction method;
large-scale test] Issue 3 281–291
Annual table of contents 2014
8 Structural Concrete 15 www.ernst-und-sohn.de
Krokstrand, Ole H.; Ramstad, Reiulf; Hölmebakk, Carl-Viggo:
Splendid concrete architecture in National Tourist Routes in Norway [concrete architecture;
scenic view; tourist routes;
Norway] Issue 2 117–125
Messari-Becker, Lamia; Mettke, Angelika; Knappe, Florian;
Storck, Ulrich; Bollinger, Klaus;
Grohmann, Manfred: Recycling concrete in practice – a chance for sustainable resource man-agement [recycled concrete; grey energy; sustainable construction;
building materials; resource management; life cycle
assess-ment] Issue 4 556–562
Winkler, Karsten; Mark, Peter;
Heek, Peter; Rohländer, Sandra;
Sommer, Simone: Punching shear tests on symmetrically reduced slab quarters [punching shear; innovative test setup; axis symmetry; experiments;
quar-tered slab] Issue 4 484–496
Bridge construction
Gama, David; Almeida, João F.:
Concrete integral abutment bridges with reinforced con-crete piles [prestressed concon-crete bridges; integral abutment bridges; reinforced concrete piles; imposed deformations;
soil-structure interaction; levels
of approximation] Issue 3 292–304 Kollegger, Johann; Foremniak,
Sara; Suza, Dominik; Wimmer, David; Gmainer, Susanne:
Building bridges using the bal-anced lift method [precast con-crete elements; post-tensioning;
bridge construction method;
large-scale test] Issue 3 281–291 Podroužek, Jan; Strauss, Alfred;
Bergmeister, Konrad: Robust-ness-based performance assess-ment of a prestressed concrete bridge [robustness; existing structure; reliability; perform-ance indicators; safety;
stochas-tic methods] Issue 2 248–257
Building maintenance/refurbishment Alani, Amir M.; Aboutalebi,
Morteza; Kilic, Gokhan: Use of non-contact sensors (IBIS-S) and finite element methods in the assessment of bridge deck structures [finite element model-ling; bridge health monitoring;
IBIS-S sensor; ANSYS] Issue 2 240–247 Onysyk, Jerzy; Biliszczuk, Jan;
Prabucki, Przemyslaw; Sadow
-ski, Krzysztof; Toczkiewicz, Robert: Strengthening the 100-year-old reinforced concrete dome of the Centennial Hall in Wrocław [pioneering concrete structure; renovation; FEM
analysis; strengthening] Issue 1 30–37 Van Coile, Ruben; Caspeele,
Robby; Taerwe, Luc: Towards a reliability-based post-fire assessment method for con-crete slabs incorporating infor-mation from inspection [fire;
post-fire assessment; residual strength; safety level; concrete
slab] Issue 3 395–407
Building materials/construction materials Abdellahi, Majid; Heidari, Javad;
Bahmanpour, Maryam: A new predictive model for the bond strength of FRP-to-concrete composite joints [bond strength;
model; GEP; FRP; composite] Issue 4 509–521 Breitenbücher, Rolf; Meschke,
Günther; Song, Fanbing; Zhan, Yijian: Experimental, analytical and numerical analysis of the pullout behaviour of steel fibres considering different fibre types, inclinations and concrete strengths [steel fibre;
pullout behaviour; laboratory test; analytical modelling;
numerical simulation] Issue 2 126–135 Fan, Yuhui; Xiao, Jianzhuang;
Tam, Vivian W. Y.: Effect of old attached mortar on the creep of recycled aggregate concrete [recycled aggregate concrete; old adhering mortar; shrinkage;
creep; influence mechanism] Issue 2 169–178 Groli, Giancarlo; Pérez Caldentey,
Alejandro; Soto, Alejandro Giraldo: Cracking performance of SCC reinforced with recy-cled fibres – an experimental study [FRC; recycled steel fibres;
crack width control; φ/ρs,ef; cover; sustainability; fib Model
Code 2010] Issue 2 136–153
Gupta, Pramod K.; Ahuja, Ashok K.; Khaudhair, Ziyad A.: Model-ling, verification and investiga-tion of behaviour of circular CFST columns [concrete-filled tube; CFST column; simulation;
CFT; composite columns; con-finement; confined concrete;
cir-cular columns] Issue 3 340–349
Korte, Sara; Boel, Veerle; De Corte, Wouter; De Schutter, Geert: Behaviour of fatigue loaded self-compacting con-crete compared to vibrated concrete [self-compacting con-crete; vibrated concon-crete; cyclic
Annual table of contents 2014 loading; fatigue; S-N curve;
crack growth] Issue 4 575–589
Krokstrand, Ole H.; Ramstad, Reiulf; Hölmebakk, Carl-Viggo:
Splendid concrete architecture in National Tourist Routes in Norway [concrete architecture;
scenic view; tourist routes;
Nor-way] Issue 2 117–125
Messari-Becker, Lamia; Mettke, Angelika; Knappe, Florian;
Storck, Ulrich; Bollinger, Klaus;
Grohmann, Manfred: Recycling concrete in practice – a chance for sustainable resource man-agement [recycled concrete; grey energy; sustainable construction;
building materials; resource management; life cycle
assess-ment] Issue 4 556–562
Ozden, Sevket; Atalay, Hilal M.;
Akpinar, Erkan; Erdogan, Hakan; Vulas¸, Yılmaz Zafer:
Shear strengthening of rein-forced concrete T-beams with fully or partially bonded fibre-reinforced polymer composites [reinforced concrete; beam shear strengthening; fibre-reinforced polymer; anchorage; partially bonded FRP; modulus of
elastici-ty; composite] Issue 2 229–239
Prince, M. John Robert; Singh, Bhupinder: Investigation of bond behaviour between recy-cled aggregate concrete and deformed steel bars [coarse recycled concrete aggregate;
replacement percentage; natural coarse aggregate; bond; pullout failure; splitting failure;
normal-ized bond strength] Issue 2 154–168 Randl, Norbert; Kunz, Jakob:
Post-installed reinforcement connec-tions at ultimate and servicea-bility limit states [post-installed reinforcement; anchorage; split-ting; pullout; serviceability limit
state] Issue 4 563–574
Reinhardt, Hans-Wolf: Aspects of imposed deformation in con-crete structures – a condensed overview [imposed deformation;
fresh concrete; shrinkage; young
concrete; cracking] Issue 4 454–460 Souza, Osvaldo Luiz de Carvalho;
Sánchez Filho, Emil de Souza;
Vaz, Luiz Eloy; Silva Filho, Júlio Jerônimo Holtz: Reliability analysis of RC beams strength-ened for torsion with carbon fibre composites [reliability index; torsion in RC beams;
car-bon fibre composites] Issue 1 38–44 Strauss, Alfred; Zimmermann,
Thomas; Lehký, David; Novák, Drahomír; Keršner, Zbyneˇk:
Stochastic fracture-mechanical parameters for the
perform-ance-based design of concrete structures [fracture-mechanical parameters; reliability; inverse analysis; fracture energy;
materi-als database] Issue 3 380–394
Urban, Susanne; Strauss, Alfred;
Schütz, Robert; Bergmeister, Konrad; Dehlinger, Christian:
Dynamically loaded concrete structures – monitoring-based assessment of the real degree of fatigue deterioration [concrete fatigue; monitoring;
deteriora-tion assessment] Issue 4 530–542 Wilhelm, Sebastian; Curbach,
Man-fred: Review of possible miner-al materiminer-als and production techniques for a building rial on the moon [mineral mate-rials; lunar base design; building materials; lunar concrete; cast basalt; sulphur concrete; moon;
lunar environment; lunar
cement; DMSI] Issue 3 419–428
Won, Deok Hee; Park, Woo Sun;
Jang, In-Sung; Han, Sang-Hun;
Han, Taek Hee: Fire resistance performance of steel composite hollow RC column with inner tube under ISO 834 standard fire [fire resistance; concrete;
ISO 834; Eurocode] Issue 4 543–555 Won, Deok Hee; Park, Woo Sun;
Yi, Jin-Hak; Han, Sang-Hun;
Han, Taek Hee: Effect of weld-ing heat on precast steel com-posite hollow columns [welding;
heat; column; precast; concrete] Issue 3 350–360 Xiao, Jianzhuang; Li, Long; Tam,
Vivian W.Y.; Li, Hong: The state of the art regarding the long-term properties of recy-cled aggregate concrete [recy-cled aggregate concrete; long-term properties; shrinkage and creep; carbonation resistance;
impermeability; fatigue
behav-iour] Issue 1 3–12
Yan, Dongming; Xu, Shilang;
Chen, Genda; Li, Hedong: Biax-ial behaviour of plain concrete subjected to dynamic compres-sion with constant lateral stress [biaxial stress state; strain rate;
dynamic strength; stress-strain
curve; failure mode; concrete] Issue 2 202–209 Yuan, Yong; Chi, Yang: Water
per-meability of concrete under uniaxial tension [reinforced con-crete; structural member; water permeability; tensioned element;
permeating test] Issue 2 191–201
Corrosion
Castel, Arnaud; Gilbert, Raymond Ian: Influence of time-depend-ent effects on the crack spacing
Annual table of contents 2014
10 Structural Concrete 15 www.ernst-und-sohn.de
in reinforced concrete beams [reinforced concrete; crack spac-ing; shrinkage; sustained load-ing; stirrup spacload-ing; fib Model
Code 2010] Issue 3 373–379
Castel, Arnaud; Gilbert, Raymond Ian: Influence of time-depend-ent effects on the crack spacing in reinforced concrete beams [reinforced concrete; crack spac-ing; shrinkage; sustained load-ing; stirrup spacload-ing; fib Model
Code 2010] Issue 3 373–379
Mancini, Giuseppe; Tondolo, Francesco: Effect of bond degradation due to corrosion – a literature survey [bond degra-dation; corrosion rate;
experi-mental procedure] Issue 3 408–418 Xiao, Jianzhuang; Li, Long; Tam,
Vivian W.Y.; Li, Hong: The state of the art regarding the long-term properties of recy-cled aggregate concrete [recy-cled aggregate concrete; long-term properties; shrinkage and creep; carbonation resistance;
impermeability; fatigue
behav-iour] Issue 1 3–12
Design and construction
Abbas, Ali A.; Mohsin, Sharifah M.
Syed; Cotsovos, Demetrios M.:
Non-linear analysis of statically indeterminate SFRC columns [fibre-reinforced concrete; finite element methods; structural
analysis] Issue 1 94–105
Abdellahi, Majid; Heidari, Javad;
Bahmanpour, Maryam: A new predictive model for the bond strength of FRP-to-concrete composite joints [bond strength;
model; GEP; FRP; composite] Issue 4 509–521 Aboutalebi, Morteza; Alani, Amir
M.; Rizzuto, Joseph; Beckett, Derrick: Structural behaviour and deformation patterns in loaded plain concrete ground-supported slabs [ground-sup-ported slab; displacement; crack
propagation; bending; punching] Issue 1 81–93 Carpinteri, Alberto; Cadamuro,
Erica; Corrado, Mauro: Mini-mum flexural reinforcement in rectangular and T-section crete beams [reinforced con-crete; code provisions; minimum reinforcement; dimensional analysis; size effects; cohesive
crack] Issue 3 361–372
Clark, Gordon: Challenges for concrete in tall buildings [tall buildings; design; concrete
floors; verticality] Issue 4 448–453 Dahl, Kaare K. B.: Bella Sky Hotel
– taking precast concrete to the
limit [precast concrete; structur-al behaviour; hotel; complex
geometry; leaning building] Issue 4 441–447 Gama, David; Almeida, João F.:
Concrete integral abutment bridges with reinforced con-crete piles [prestressed concon-crete bridges; integral abutment bridges; reinforced concrete piles; imposed deformations;
soil-structure interaction; levels
of approximation] Issue 3 292–304 Groli, Giancarlo; Pérez Caldentey,
Alejandro; Soto, Alejandro Giraldo: Cracking performance of SCC reinforced with recy-cled fibres – an experimental study [FRC; recycled steel fibres;
crack width control; φ/ρs,ef; cover; sustainability; fib Model
Code 2010] Issue 2 136–153
Gupta, Pramod K.; Ahuja, Ashok K.; Khaudhair, Ziyad A.: Model-ling, verification and investiga-tion of behaviour of circular CFST columns [concrete-filled tube; CFST column; simulation;
CFT; composite columns; con-finement; confined concrete;
cir-cular columns] Issue 3 340–349
Hertz, Kristian; Castberg, Andreas;
Christensen, Jacob: Super-light concrete decks for building floor slabs [super-light struc-tures; deck strucstruc-tures; precast concrete; lightweight concrete;
prestressed concrete; structural design; testing structural
ele-ments] Issue 4 522–529
Liu, Xian; Jiang, Wei; De Schutter, Geert; Yuan, Yong; Su, Quanke:
Early-age behaviour of precast concrete immersed tunnel based on degree of hydration concept [precast immersed tun-nel; early-age cracking; degree of hydration; creep under varying
stress levels] Issue 1 66–80
Liu, Xian; Yuan, Yong; Su, Quanke: Sensitivity analysis of the early-age cracking risk in an immersed tunnel [immersed tunnel; early-age cracking;
sensi-tivity analysis; curing scheme] Issue 2 179–190 Magnusson, Johan; Hallgren,
Mikael; Ansell, Anders: Shear in concrete structures subjected to dynamic loads [dynamic loads;
impulsive loads; rise time; shear;
initial response; support
reac-tions; arch action] Issue 1 55–65 Nyhus, Bente Skovseth: Consistent
practical design of concrete structures [concrete design;
practical design; consistent stiff-ness method; non-linear analy-sis; shear design; MCFT; safety;
cost effective] Issue 3 305–316
Annual table of contents 2014 Podroužek, Jan; Strauss, Alfred;
Bergmeister, Konrad: Robust-ness-based performance assess-ment of a prestressed concrete bridge [robustness; existing structure; reliability; perform-ance indicators; safety;
stochas-tic methods] Issue 2 248–257
Siburg, Carsten; Hegger, Josef:
Experimental investigations on the punching behaviour of reinforced concrete footings with structural dimensions [Eurocode 2; footings; punching shear; shear slenderless; size
effect; fib Model Code 2010] Issue 3 331–339 Vicente, Miguel A.; González,
Dorys C.; Mínguez, Jesús;
Martínez, José A.: Residual modulus of elasticity and maxi-mum compressive strain in HSC and FRHSC after high-stress-level cyclic loading [fatigue; high-strength concrete;
fibre-reinforced high-strength concrete; modulus of elasticity;
maximum compressive strain] Issue 2 210–218 Wilhelm, Sebastian; Curbach,
Man-fred: Review of possible miner-al materiminer-als and production techniques for a building rial on the moon [mineral mate-rials; lunar base design; building materials; lunar concrete; cast basalt; sulphur concrete; moon;
lunar environment; lunar
cement; DMSI] Issue 3 419–428
Won, Deok Hee; Park, Woo Sun;
Jang, In-Sung; Han, Sang-Hun;
Han, Taek Hee: Fire resistance performance of steel composite hollow RC column with inner tube under ISO 834 standard fire [fire resistance; concrete;
ISO 834; Eurocode] Issue 4 543–555 Won, Deok Hee; Park, Woo Sun;
Yi, Jin-Hak; Han, Sang-Hun;
Han, Taek Hee: Effect of weld-ing heat on precast steel com-posite hollow columns [welding;
heat; column; precast; concrete] Issue 3 350–360
Dynamic actions/earthquakes Korte, Sara; Boel, Veerle; De
Corte, Wouter; De Schutter, Geert: Behaviour of fatigue loaded self-compacting con-crete compared to vibrated concrete [self-compacting con-crete; vibrated concon-crete; cyclic loading; fatigue; S-N curve;
crack growth] Issue 4 575–589
Magnusson, Johan; Hallgren, Mikael; Ansell, Anders: Shear in concrete structures subjected to dynamic loads [dynamic loads;
impulsive loads; rise time; shear;
initial response; support
reac-tions; arch action] Issue 1 55–65 Vicente, Miguel A.; González,
Dorys C.; Mínguez, Jesús;
Martínez, José A.: Residual modulus of elasticity and maxi-mum compressive strain in HSC and FRHSC after high-stress-level cyclic loading [fatigue; high-strength concrete;
fibre-reinforced high-strength concrete; modulus of elasticity;
maximum compressive strain] Issue 2 210–218 Yan, Dongming; Xu, Shilang;
Chen, Genda; Li, Hedong: Biax-ial behaviour of plain concrete subjected to dynamic compres-sion with constant lateral stress [biaxial stress state; strain rate;
dynamic strength; stress-strain
curve; failure mode; concrete] Issue 2 202–209
Eurocode
Carpinteri, Alberto; Cadamuro, Erica; Corrado, Mauro: Mini-mum flexural reinforcement in rectangular and T-section crete beams [reinforced con-crete; code provisions; minimum reinforcement; dimensional analysis; size effects; cohesive
crack] Issue 3 361–372
Scott, Richard: Serviceability uncertainties in flat slabs [load tests; finite element analysis;
Scott, Richard: Serviceability uncertainties in flat slabs [load tests; finite element analysis;