• No results found

Design And Development Of Planar Antenna For GSM Application

N/A
N/A
Protected

Academic year: 2019

Share "Design And Development Of Planar Antenna For GSM Application"

Copied!
24
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.1: GSM structure
Figure 2.1 Return Loss 1800 MHz of antenna
Figure 2.2 Measured return loss of proposed antenna compared to simulated result
Figure 2.3 Comparison of simulation and experimental VSWR results
+5

References

Related documents

These findings indicate that continuous convective-sedimentation assembly of live cell + latex polymer blends on non-woven porous substrates is a promising method for

In key point encoding and transmission when the scene is moving quickly to reduce the number of D- or U-frames.The number of key points that must be encoded is significantly

The massive development in wireless infrastructures and handheld devices allow mobile users to get multimedia contents with universal access routes, for example

In the year of 2012, the authors "Garrab, A.; Bouallegue, A.; Ben Abdallah" presented a paper titled "A new AMR approach for energy saving in Smart Grids using Smart

An abstract model of a system based on long-range wireless communication was proposed in most of the above air pollution and quality monitoring systems are based on

The effect of temperature on resistance to Bacterial wilt, caused by Ralstonia solanacearum , in tobacco cultivars.... Describing the mechanism of resistance to Bacterial wilt,

In order to determine how the use of WMA additives effect the binder rheology of blends containing higher percentages of RAP, Dynamic Shear Rheometer (DSR) and

Retrospective study of parasitic diseases in domestic and wild animals in Northern Kerala revealed strongylosis as predominant cause of gastrointestinal parasitosis