• No results found

Fracture toughness study on bulk metallic glasses and novel joining method using bulk metallic glass solder

N/A
N/A
Protected

Academic year: 2019

Share "Fracture toughness study on bulk metallic glasses and novel joining method using bulk metallic glass solder"

Copied!
42
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 3-1. (a) Single edge notched bending fracture specimen geometry and dimension.
Table 3-1. Experimental conditions and data of BMGs used in this study.
Figure 3-2. Scanning electron micrographs of the fracture surfaces. The vertical arrows
Figure 3-3. Fracture surface of area B (defined in Figure 3-2(a)). (a) specimen S2, (b) S7,
+7

References

Related documents

Deletion of the E6 and E7 genes restored the p53 and Rb protein levels, induced apoptosis and inhibited the proliferation of HeLa cells.. Apoptosis and proliferation of

The chapters in my thesis are structured around four of the most important influences on drug use in prison highlighted by my research: societal, relating to

So, to answer the research question; which processing and regulation strategies are most successful for higher learning outcomes in a project course within project and problem

To make it easier to process all the data that is gathered in the main project that was discussed in the problem statement and also to save work in the future it is

The analysis is done for 30 RPM and the results are plotted in the graph, the red portion shown in the assembly picture shows the maximum Equivalent Stress

Results: All signs show high specificity in prediction of endometriosis although only 2 signs (higher level of left tube and bilateral tubal S or C shape) showed significantly