• No results found

Hardness-strength relationships in the aluminum alloy 7010

N/A
N/A
Protected

Academic year: 2019

Share "Hardness-strength relationships in the aluminum alloy 7010"

Copied!
17
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Chemical Composition (in wt.%) of 7010 alloys used in this study. Si Fe Cu Mg Zn Zr Al
Figure 1. The typical microstructure of the 7010 alloy: (a) SEM image of specimen from forging at low magnification, demonstrating grain size and coarse constituents common to the samples in this study
Figure 2.Vickers hardness versus yield stress for 7010 plate and forging investigated in this study
Figure 3.Vickers hardness versus yield stress relationship drawn from the data of Flynn [39,40]
+2

References

Related documents

Table I provides information concerning fiscal year 2010 capital expenditures and related information for those Illinois health care facilities that reported data.. Total

2 Underlying operating profit is operating profit of subsidiaries and joint ventures before special items. 3 Underlying profit before tax is reported profit before tax before

The African Union Commission embarked on a consultative mission to Juba from 20 to 22 July 2017, to engage the Transitional Government of National Unity on implementating Chapter 5

We note that for Hall measurements, we have grown thick samples (1150 nm) on a SOI substrate (Silicon On Insulator) to avoid any transport contribution coming from

Meeting the welfare needs of dogs is often closely linked to ‘responsible dog ownership’. In the UK, this concept has been promoted by the Kennel Club [ 40 ], the British

By comparing the south-east with the north-east panels we see that under this tax scheme the sign of the marginal e¤ect of capital taxation is exactly the opposite to the one found

Unlike rainfall threshold-based methods that uses the historical/synthesized rainfall events, the real-time simulation method can be an alternative by directly incorporating nowcast

The general goals of this research are: 1) to study the shear behavior of prestressed concrete I-beams strengthened with CFRP; 2) to quantify the added shear capacity of the CFRP; 3)