• No results found

A Modified Avian Egg Shaped CPW Fed Printed Monopole for SWB Applications

N/A
N/A
Protected

Academic year: 2020

Share "A Modified Avian Egg Shaped CPW Fed Printed Monopole for SWB Applications"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1. Geometry of an egg
Fig. 5. Antenna with slot
Table- I: Optimized dimensions [mm]
Fig. 11 Reflection coefficient for different antennax =
+2

References

Related documents

Before that a simple cane was used as helping aid for blind people.But this device is able to detect objects on the floor, but it will not detect the objects that are at a certain

Alternatively, we used the three- dimensional electromagnetic code Microwave Studio [17] to calculate the phase velocity and impedance as a function of the folded

Intimate Partner Violence Typology, Self-Blame, Depression and Intimate Partner Violence Typology, Self-Blame, Depression and PTSD Among Homeless Women.. PTSD Among

Thus the physical and mechanical properties of Geogrid were found to considerably increase the Compressive and Flexural strength of Aerated light weight concrete

From the analysis result the stress distribution and modified leaf spring is again improve strength of the centre portion of the leaf by varying thickness in the single

It assumes that on average a fraction m of the ova produced by an infected fe- male are uninfected, and that all uninfected ova are equally susceptible to CI ( cf. Carrington et

In particular, we establish conditions for existence and uniqueness of the forward problem and well-posedness (including method stability under numerical approximations) for the

Strong friction welded joints for different surface interfaces were obtained and mechanical characteristic studies of the same were carried out. The major