• No results found

Numerical Simulation of Vibration and Structural Born Noise Analysis of Industrial Gearbox

N/A
N/A
Protected

Academic year: 2020

Share "Numerical Simulation of Vibration and Structural Born Noise Analysis of Industrial Gearbox"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig 2. FE model of Helical Gearbox casing
Figure 5 and 6 respectively.   Table 2 Results of Static analysis of Gearbox
Fig 7.  Mode shapes of Natural frequencies
Table 4 Magnitude of the frequency at excitation frequencies
+2

References

Related documents

American people, that we will always adequately fulfill our responsibility of furnishing the highest standard of medical care possible to the various communities as long as we

In making an effort to design the control method in the same way, the proposed strategy is investigated, where the integration of the trajectory optimization and the new structure

One must be careful, however, in using uniform-rupture models to estimate local tsunami hazards, for three reasons: (1) the average slip associated with tsunami earthquakes is

The probability of a successful implementation of BC technology is high in small companies, especially when using Smart Contracts. Despite the lack of parallel application

“ Solid Modeling generation and Nonlinear Finite Element Analysis Of Two Post Roll-Over Protective Structure (ROPS) in Accordance with SAE J2194 Static Loading Standard”, MS Thesis,

Further analysis of the cluster containing 37 factors that had FOX family motifs, showing the overlap of FOX TF binding in these peaks, as well as the median offset of the FOX

Wong et al.’s (2008) extensive literature review on clinical handover prepared for ACSQHC concluded that there were several high risks to quality and safety arising from

Shizen is the Japanese word for nature and the sec- ond video scroll reflects our relationship to nature by citing and transposing form and content of the Makimono - a