• No results found

Theoretical modelling of frequency dependent elastic loss in composite piezoelectric transducers

N/A
N/A
Protected

Academic year: 2019

Share "Theoretical modelling of frequency dependent elastic loss in composite piezoelectric transducers"

Copied!
20
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 2: Physical properties of the transducer
Figure 1: (a) Electrical impedance |ZT| (Ω) against frequency f (MHz), and
Figure 2: Electromechanical coupling coefficient k against ceramic volume frac-
Figure 4: (a) Electrical impedance |ZT|(Ω) against frequency f (MHz), and
+5

References

Related documents

14 He also provided for the right of appeal, and for trial by a jury of six men.' 5 This jury had no legal standing under Mexican law, but it represented fair trial to

An attempt was taken in study in this line where 133 farmers from two blocks of 24 pgs, WB was selected and the improved technology was provided to them including new

While the situated nature of human rights discourse means one should be cautious about generalising from this one case study, some generalisability is possible – first, to other

These include hot weather, hot dry windy days, high nitrogen levels, water stress, and problems that prevent lettuce taking up enough water for example root rot.. The right choice

The aviation major will achieve a score of at least 80 on the course project measured by common exam administered to all majors by all instructors teaching the Aviation

As previously described, the turbine used in the single turbine design scenario has a capacity of 13 MW with a 212 m rotor diameter and 128 m hub height, corresponding to the

In order to evaluate how the aspect ratio and different heating locations affects the heat transfer rate, the average Nusselt number is plotted as a function

Further we considered the types of mobile phone jammers such as adjustable mobile jammer, remote control mobile jammer, school mobile jammer , prison mobile jammer.Cell phone