• No results found

Simple Fabrication of Superhydrophobic Nickel Surface on Steel Substrate via Electrodeposition

N/A
N/A
Protected

Academic year: 2019

Share "Simple Fabrication of Superhydrophobic Nickel Surface on Steel Substrate via Electrodeposition"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Schematic illustration of the fabrication of superhydrophobic Ni surface on the steel substrate
Figure 2.  Effect of current density on the CAs of the sample surfaces.
Figure 4. LSCM topographical images of bare steel surface (a) and superhydrophobic Ni surface (b)
Figure 5.  FTIR spectra of the electrodeposited Ni surface: (a) before modification and (b) after modification; (c) EDS spectra of the superhydrophobic Ni surface
+3

References

Related documents

Pertaining to the secondary hypothesis, part 1, whether citalopram administration could raise ACTH levels in both alcohol-dependent patients and controls, no significant

We measured the average blood glucose levels over time for rats administered exenatide solution and exenatide-loaded polymers and, compared with the Control group, we found

The ethno botanical efficacy of various parts like leaf, fruit, stem, flower and root of ethanol and ethyl acetate extracts against various clinically

Twenty-five percent of our respondents listed unilateral hearing loss as an indication for BAHA im- plantation, and only 17% routinely offered this treatment to children with

In summary, we have presented an infant with jaundice complicating plorie stenosis. The jaundice reflected a marked increase in indirect- reacting bilirubin in the serum. However,

In this study it is aimed to investigate the total lipid and the fatty acid composition of pearl mullet which is the only fish species occurring in Lake Van and

separator presents good cycling performance in lithium ion batteries and a high ionic conductivity

Based on the idea, we have put forward novel routing strategies for Barrat- Barthelemy- Vespignani (BBV) weighted network. By defining the weight of edges as