• No results found

Development Of Wireless Perimeter Fence Alarm System

N/A
N/A
Protected

Academic year: 2019

Share "Development Of Wireless Perimeter Fence Alarm System"

Copied!
24
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1: Project Flowchart

References

Related documents

On the expiry date if the Member has an open position, it is the difference between the final settlement price and the previous day’s settlement pricea.

Creation of a formal articulation agreement between OSU- Columbus and CSCC provided a means to formalize the transfer process for coursework, as well as facilitate the transition

The final outcome of the Interface Compatibility step is a matching list characterizing each correspondence according to the four levels of the Assessment Scheme, named

Emergency Zone Highlight it press Enter, Default is NO, ( If you set YES, the zone will be on 24hours, regardless of your.. system’s Arm or Disarm status. This is recommended to

Enter your four-digit User PIN code at the control unit or press “DISARM” button at the remote key (optional accessory) within the delay time (30 seconds at factory setting,)

The control panel is in armed mode, If the triggered sensor is programmed in the why activating a sensor will not cause Alert Zone (Bypass Zone), alarm will not an alarm, or call

„ Press RESET (at the back of base panel) for 2 seconds, STATUS indicator should turn to red light, this is in..

• Smart touch keypad with 4 line message LCD display • Quad-band GSM communication, works with SIM card • Calender, five personal emergency phone numbers • One central