• No results found

DSL 2740B F1 Manual v2 00(EU) pdf

N/A
N/A
Protected

Academic year: 2020

Share "DSL 2740B F1 Manual v2 00(EU) pdf"

Copied!
91
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

table. A maximum 32 entries can be configured   Allows you to configure RIP (Routing Information Protocol)

References

Related documents

If you have an Internet connection with no router the OpenScape Office MX system is con- figured as a DSL router as described below. The connection to the DSL Router is done via

Note: If you are configuring the router from a wireless computer and you change the router’s SSID, channel, or security settings, you will lose your wireless connection when you

To access the Manual Internet Connection Setup page, click on the Manual Internet Connection Setup button.. On this page there a multiple parameters that can be configured

To access the Manual Internet Connection Setup page, click on the Manual Internet Connection Setup button.. On this page there a multiple parameters that can be configured

If you want to manually configure the wireless settings on your router click Manual Wireless Network Setup.. and refer to the

Click the Manual Internet Connection Setup button if you want to enter your Internet settings without running the Internet Connection Setup Wizard.. Refer to “Manual

The Setup > WAN Setup window displays Internet Connection Type and DDNS settings for configuring WAN port of the wireless router.. To configure the WAN settings for the

• Setup: On the Setup screens, you can configure general settings, such as Internet connection, IP address, DHCP server settings, DDNS, time settings, and advanced router