Lumped Model for Proton Exchange Membrane Fuel Cell (PEMFC)

However, poor corrosion resistance and high interfacial contact resistance (ICR) are major challenges for metallic bipolar plates used in proton exchange membrane

The effects of the operating temperature, operating current density and proton exchange membrane thickness, phosphoric acid doping level, relative humidity of HT-PEMFC, and

Index Terms—Electrochemically active surface area, nonlinear model predictive control, nonlinear observation, proton exchange membrane fuel cells, degradation, starva-

In-situ Monitoring of Internal Temperature, Flow Rate and Pressure in the High-temperature Proton Exchange Membrane Fuel Cell Stack using Flexible Integrated Micro Sensor*.

Finite Element Analysis for Stress Distribution in a Proton Exchange Membrane Fuel Cell Stack.. Nurato 1,2 , Edy Herianto Majlan 1,* , Wan Ramli Wan Daud 1 , Teuku Husaini

Proton exchange membrane fuel cells (PEMFCs) dominate the transportation fuel cell market and platinum (Pt) is the catalyst material used for both anode and cathode.. This

Proton Exchange Membrane fuel cell degradation, Prognostic and Health Management, Time-series prediction, Adaptive Neuro-Fuzzy Inference System.. [*] Corresponding

Numerical investigation of hydrogen consumption in Proton Exchange Membrane Fuel Cell by using computational fluid.. dynamics