• No results found

Development of An Electrochemical Impedance Immunosensor for Myoglobin Determination

N/A
N/A
Protected

Academic year: 2019

Share "Development of An Electrochemical Impedance Immunosensor for Myoglobin Determination"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.  UV/vis spectra of the colloidal solution of Au nanoparticles in 2-propanol and the unreacted 2-propanol solution with MPMSi and AuCl4− (S/Au ratio of 1:1)
Figure 3.  CV of the original ITO; APTES/ITO; AuNPs/APTES/ITO; Ab-Mb/ZnS(MPA)/APTES/ITO glass as well as Ab-Mb/AuNPs/APTES/ITO in PBS, pH 7.4, containing 2 mM [Fe(CN)6]3 −/4 − plus 0.1 M KCl
Figure 4.  Nyquist plots of original ITO; APTES/ITO; AuNPs/APTES/ITO as well as Ab-Mb/AuNPs/APTES/ITO in PBS (pH 7.4) containing 2 mM [Fe(CN)6]3−/4− plus 0.1 M KCl
Table 1. Performance comparison of the Ab-Mb/AuNPs/APTES/ITO and other Mb electrochemical sensor
+2

References

Related documents

7.5.3 Cyclic Voltammetry and Electrochemical Impedance Spectroscopy Results Cyclic voltammetry and Electrochemical Impedance Spectroscopy experiments were conducted to investigate

Cyclic voltammetry, galvanostatic charge/discharge cycling experiments and electrochemical impedance spectroscopy (EIS) measurements of the PPy coated Fe electrodes were performed

Electrochemical impedance spectroscopy and cyclic voltammetry were done to study ZnO NR arrays, and the immobilization and the hybridization of ssDNA at the electrode surface..

However, it can be proposed that the electron shift was impeded for redox reaction as for electrode modified by 4-ATP SAM, which was supported by no appearance

The electrochemical performance of prepared carbon electrode was determined using cyclic voltammetry, and electrochemical impedance spectroscopy.. To the authors’

Abbreviations: AuNPs, gold nanoparticles; DPV, differential pulse voltammetry; EIS, electrochemical impedance spectroscopy; EXPAR, exponential amplification reaction;

Electrochemical Impedance Spectroscopy (EIS) has become a well established tool for the study of corrosion and degradation of metallic materials through electrochemical reactions.

The formation of BLM on the polyaniline surface was confirmed by electrochemical impedance spectroscopy (EIS) and cyclic voltammetric methods using 0.1 M NaCl bath