• No results found

The Influence of Nickel on Corrosion Behavior of Low Alloy Steel in a Cyclic Wet-dry Condition

N/A
N/A
Protected

Academic year: 2019

Share "The Influence of Nickel on Corrosion Behavior of Low Alloy Steel in a Cyclic Wet-dry Condition"

Copied!
13
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.  Microstructure of the experimental steels
Figure 2.  Polarization curves of four steels in 1.0 wt% NaCl and 0.01 mol/L NaHSO3 before the wet-dry cyclic test
Table 1.  The fitted values of the electrochemical parameters (polarization curves and impedance)
Figure 6.  Thickness loss results of carbon steel and low alloy steel
+5

References

Related documents

* Source 2012 Commonwealth Fund International Health Policy Survey of Primary Care Physicians (Schoen & Osborn, 2012) except the values for Demark which are

NOTE 9 – Commercial solutions used for preparing calibration control solutions and control samples on filter must ideally come from a different manufacturer than the one

Simulated Title 24 cool-roof annual energy, peak demand, cooling equipment cost, and NPV dollar savings (energy only, and total=energy+equipment) for a prototypical Title 24 building

OCERS as soon as possible to keep us updated with a current address and phone number so you continue to re- ceive important information from us, including your 1099- R Form in

To examine the impact of culture and country on the credibility perceptions of readers in social media, we used metadata of tweet authors including gender, image, username,

The idea is to model binary pro- grams using pushdown systems (that can be used to model the stack operations occurring during the binary code execution), use reachability analysis

Dans les pots de miel `a basse interaction il n’y a pas assez d’interaction avec les attaquants et avec les pots de miel `a forte interaction la majorit´e des actions sont permises

You can now click the mouse arrow on the guide star and a green cross will appear, centred on the star (see above). Don’t select a very bright guide star, as this will result in