• No results found

Geometry of screw compressor rotors and their tools

N/A
N/A
Protected

Academic year: 2019

Share "Geometry of screw compressor rotors and their tools"

Copied!
23
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 2  Screw rotor profile 1: main; 2: gate; 3: rotor external; 4: pitch circles; 5: sealing
Fig. 3 shows pairs of screw compressor rotors plotted together for their comparison.
Fig. 5  Coordinate system of helical gears with non-parallel  and non-intersecting axes
Fig. 6  Example of a gate rotor enveloped by its main counterpart by use of direct digital simulation
+7

References

Related documents

The Blood Angels' gene-seed flaw has been transmitted to every Successor Chapter it went into (which is why their gene-seed stopped being used in the creation of new Chapters),

knowledge gained, they may also provide other bene- fits, such as added job opportunities for properly trained neurologists; networking and potential collab- orations in

At that moment there was no separate estimation of stocks of computers; instead they were included in the total stock of machinery affecting the assumption of mean service life..

In conclusion, this case study of bedside handover used by nursing staff in six wards in two hospitals provides a description of its structures, processes and perceived outcomes..

When connected to Advant Fieldbus 100, the communication interface module and its S800 I/O modules are called as S800 I/O station.. An S800 I/O station works as a slave for one

The purpose of this article is to demonstrate through anecdotal, qualitative and quantitative evidence, that incorporating pair-programming into a software development process

28 As discussed in the following sections, the reason for this perverse effect is that Table 1 shows border enforcement’s net impact: the reported coefficient of border

The results indicated that the gap distance between the prism base and the metal film had a significant influence on the reflectivity of SPR sensing by affecting the coupling