Design and analysis of welding fixture based on dynamic load condition

With her as the narrative model found in each painting, I created an installation of 8, 4x8 ft paintings based upon a myriad of concepts taken from Tibetan Buddhism, my

This project will focus on designing and developing a prototype of energy harvester using piezoelectric material. The piezoelectric material that use in this project

i) To study the effect of deposition parameters on weld bead height and microhardness of the deposited material. ii) To characterize the microstructure

Power output from wind generators can be categorized into two parts through the use of mechanical shaft power directly (a gearing ratio) or by allowing the wind

In this project, the reference design based on the 16-bit Reduced Instruction Set Computer (RISC) Pesona original architecture and designed using Verilog HDL..

Semasa kejadian bas bergolek berlaku, struktur badan bas yang tidak kukuh akan bertukar kepada keadaan plastik (bukan linear) dan tidak mampu untuk menahan daya

To develop telephone dialer with connected at the movement

The loss of C11-mediated antiviral activity in cells that lack STING (but not MAVS, TRIF, or both MAVS and TRIF) is consistent with the molecular observations indicating that STING