• No results found

Design And Analysis Of Cast Metal Matrix Using CAD Tools

N/A
N/A
Protected

Academic year: 2019

Share "Design And Analysis Of Cast Metal Matrix Using CAD Tools"

Copied!
24
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2.1: (a) The yield Re and (b) the tensile strength Rm of composite materials on an Al-4.5% Cu -1.5%Mg matrix reinforced with SiC dispersion particles of 10.7mm diameter (Kaczmar et al., 2000)

References

Related documents

After analyses and evaluate the performance of four routing protocols (AODV, DSR, GPSR, and OLSR) in different VANET networks scenarios using five performance parameters:

We also sought to determine if hospitals allocated to our intervention had a higher proportion of hospitalized medical patients appropriately managed for thrombopro- phylaxis within

Ndao et al EURASIP Journal on Wireless Communications and Networking 2013, 2013 167 http //jwcn eurasipjournals com/content/2013/1/167 RESEARCH Open Access Development and test of a

The primary outcome was the proportion of overweight or obese patients to whom the health professional had offered a weight loss intervention within the study period.. This

When bactericide concentration was 20 mg/L and contact time was 1 h, the effect of killing saprophytic bacteria (TGB), sulfate-reducing bacteria (SRB) and iron bacteria (IB)

In order to better utilize lignocellulosic biomass in butyric-acid fermentation by Clostridium tyrobutyricum , the inhibitory effects of six potential inhibitors (furfural,

International Journal of Scientific Research in Computer Science, Engineering and Information Technology CSEIT1725148 | Received 01 Oct 2017 | Accepted 10 Oct 2017 | September October