• No results found

Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites

N/A
N/A
Protected

Academic year: 2019

Share "Relationship between different mechanical properties of phenol formaldehyde SLG-reinforced composites"

Copied!
24
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 4: Short Bar Specimen with Straight Chevron Slots.
Figure 12:  PF/E-SPHERE (20%) post-cured for 4 hours at 80  oC at a magnification of 25,000 times
Figure 13: SEM image of phenolic resin reinforced by 20% by weight of slg and post-cured for 4 hours at 80 oC at a magnification of 15,000 X
Table 2:  Viscosity and gel time measurements of phenol formaldehyde adhesives {adapted from [25]}

References

Related documents

EPA AP-42 emission factors generally are assigned a rating, from A (excellent) to E (poor), to assess the quality of the data being referenced. Current EPA total

Moreover, corresponding to a certain level of free cash flow and enterprise scale, the larger the proportion of inside ownership is, the non-pecuniary benefit on the

In the current study, we intend to study the effect of acupuncture for poststroke cavovarus foot with objective biomechanical outcome measurements from the RSScan gait system..

Table 3.20 The crystallization result for the triple selenium modified DNA double- strand with 5'-position GC overhangs binding with small molecule DB2457.. concentration

A sm all section develops th e adjoint and co-adjoint representations, co-adjoint orbits and invariant vector fields on hom ogeneous m anifolds.. In order to

The first data block consists of three fields (Fig. 14) : the first – the control field – contains infor- mation about the length of the telegram, the transmis- sion

The large volumes of water applied, comparatively high sprinkler uniformity and relatively small volumes of water being used by the crop during this period acted to maintain a

Protein expression was then induced by the addition of IPTG to a final concentration of 1 mM, and incubation continued for a further 5-8 h at 37°C with shaking, after which the