• No results found

Quantitative shadowgraphy and proton radiography for large intensity modulations

N/A
N/A
Protected

Academic year: 2019

Share "Quantitative shadowgraphy and proton radiography for large intensity modulations"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1(a) shows a plane with 3 sites and point A. Com-
FIG. 1. (a) An example of a case with 3 sites and a point A which is closest to the site 1
FIG. 2.Illustration of the algorithm with 100 sites. Figure (b) shows the deployed sites in line 5 in Algorithm 1
FIG. 4. The beam’s intensity modulation on the screen andits horizontal 1D-cross-section at the middle position for (a)small intensity modulation, (b) large intensity modulation,(c) a case where caustics have formed, and (d) where thecaustics already branc
+3

References

Related documents

Farmers from five study sites along the Western side of Leyte were gathered in eight focus group discussions to discuss the issues of success and sustainability of their

All models offer impressive scalability, including up to 8GB of memory and a choice of high- performance hard disk drives with an internal storage capacity of 600GB (two

Real Internet Malware Sample Configuration Analysis Results Internal logs Traffic Log Emulated Internet Filtering Rules Sandbox Access Controller OS Image Config Analysis

Esta es la tarea de un arte comprometido para Adorno, es decir, no imitar literal- mente el estado de cosas reales a través de la representación del arte, sino la creación de un

[r]

In the first half of 2013, advanced economies strengthened, with an upturn in Japan and the recession in the euro area running out, while growth in most emerging markets

However, if the flight schedule becomes tight, which means more aircraft need to use the runway within the same time period, the gap between the rolling horizon method and the

As consequence, this paper contains a study on the effect of the rotor bar number on the torque (average and quality) of five-phase induction machines under different supply