• No results found

Niobium Sputter Coated Stainless Steel as a Bipolar Plate Material for Polymer Electrolyte Membrane Fuel Cell Stacks

N/A
N/A
Info
Download
Protected

Academic year: 2019

Share "Niobium Sputter Coated Stainless Steel as a Bipolar Plate Material for Polymer Electrolyte Membrane Fuel Cell Stacks"

Copied!
13
0
0

Loading.... (view fulltext now)

Download now ( 13 Page )

Full text

Figure

Table 1. Process parameters for DC magnetron sputtering
Figure 1. A schematic of an ICR measurement set-up
Figure 2(b) shows a cross-sectional micrograph with a low magnification including clad Nb layer and
Table 2. Results of immersion testing at 80ºC in 1 M H2SO4 with 2 ppm HF
+5

References

Download now ( PDF - 13 Page - 690.94 KB )

Related documents