• No results found

Hampering Görtler vortices via optimal control in the framework of nonlinear boundary region equations

N/A
N/A
Protected

Academic year: 2019

Share "Hampering Görtler vortices via optimal control in the framework of nonlinear boundary region equations"

Copied!
36
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Flow configuration sketch.
Figure 2. Schematic of the control algorithm steps.
Figure 3. Energy (left) and the span-wise averaged wall shear stress (right) calculated usingfour different grids (Λ∗ = 1.2 cm).
Figure 4. Span-wise averaged wall shear stress (left) and energy (right) as a function of thestream-wise direction and for different roughness span-wise separation (Λ∗ = 1.2 cm).
+7

References

Related documents

The imaginary element of Saudi Arabia is thus part of the global resource utilized by activists in order to frame a contemporary problem and social issues and a ‘perfect’

Gariglio, “High prevalence of autoantibodies against the nuclear high mobility group (HMG) protein SSRP1 in sera from patients with systemic lupus erythematosus, but not other

Changes in energy balance, feed intake, milk yield, milk composition and milk FA profile over time during lactation and feed restriction with subsequent realimentation were evaluated

Multivariate logistic analysis showed that feeding first colostrum meal beyond 3 hours after birth, group housing before 30 d of age and feeding daily less than 5 L of milk

processes, and “health care assistants” to carry out health promotion (Roland, 2006). Most practices set up “QOF teams” to ensure the systems are in place to collect the

1. Connect the cable of the remote control switch to the connectors on the printed circuit board inside the electrical box through the connecting hole in the cabinet. Connect the

Most research on monetary policy rules in the last two decades has focused on models, in which the monetary transmission mechanism works as follows: the nominal interest rate

In the Kaupang graves lead weights are entirely absent as copper alloy/iron weights make up 70% of the finds, and copper alloy types 30%.. Similarly, 68% in the settlement location at