• No results found

Magnetron Sputtering Silicon Thin Film Electrodes for Lithium-Ion Batteries

N/A
N/A
Protected

Academic year: 2019

Share "Magnetron Sputtering Silicon Thin Film Electrodes for Lithium-Ion Batteries"

Copied!
15
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

figure; such a morphology provides a large surface area for the subsequent Si deposition process
Figure 2.  SEM images of silicon thin films with 0.013 (a, b), 0.293 (c, d) and 0.400 (e, f) mg/cm2 mass loading
Figure 3.  TEM micrograph (a) of a fragment of the silicon film with mass loading of 0.293 mg/cm2 on a carbon substrate along with microdiffraction rings for selected areas of the sample (b, c)
Table 1. Interplanar distances calculated from the microdiffraction pattern presented in Fig
+6

References

Related documents

Three assumed grains were drawn in Figure 1 (d). In addition, the carbide prominences were not shown.. Thus, the etchant No. It is noticeable that the casting alloy of IN 713C was

What's the Date? High Accuracy Interpretation of Weekday Names Proceedings of the 22nd International Conference on Computational Linguistics (Coling 2008), pages 553?560 Manchester,

An increase in market value from using risk management to avoid fi- nancial distress is reported by Staking and Babbel, “The Relationship between Capital Structure, Interest

[14] O.A.El.Tantaway, H.M.Abu.Donia, Generalized Separation Axioms in Bitopological spaces.The Arab J.Sci.Eng., 30(1A), 117-129, 2005 [15] Zaitsev, On certain class of

FIGURE 1.18 : Performance achieved by the proposed method without dy- namically adjusting the scheduler group size (number of threads per group, thds/grp) with respect to task graphs

Is there a statistically significant difference in OAKS math scores for students with learning disabilities by Special Education placement options

Keywords: Total ionizing dose (TID) effects; γ ray radiation; RRAM; Hybrid filament model; Filament; Radiation-induced

Um sowohl diese zu reduzieren, als auch eine vollständige oder zumindest eine für eine beurteilbare Bildgebung ausreichende Orbitalbewegung zu gewährleisten, kamen