Ionic Conductivity and Transporting Properties in LiTFSIDoped Bis(trifluoromethanesulfonyl)imide-Based Ionic Liquid Electrolyte
Full text
Figure
![Figure 1. Temperature dependence of density data for neat [MPI][TFSI] and LiTFSI-doped [MPI][TFSI]](https://thumb-us.123doks.com/thumbv2/123dok_us/1907443.149107/5.596.158.397.414.603/figure-temperature-dependence-density-tfsi-litfsi-doped-tfsi.webp)
![Figure 2. Dynamic viscosity ([MPI][TFSI].](https://thumb-us.123doks.com/thumbv2/123dok_us/1907443.149107/6.596.174.421.370.547/figure-dynamic-viscosity-mpi-tfsi.webp)
![Table 2. The VTF equation parameters of viscosity (η = ηo exp[B/(T - To)]) and conductivity (σ = σo exp[-B′/(T - To)])](https://thumb-us.123doks.com/thumbv2/123dok_us/1907443.149107/7.596.63.532.330.476/table-vtf-equation-parameters-viscosity-ho-conductivity-so.webp)
![Figure 3. Dependence of specific conductivity (doped [MPI][TFSI].](https://thumb-us.123doks.com/thumbv2/123dok_us/1907443.149107/8.596.184.419.133.313/figure-dependence-specific-conductivity-doped-mpi-tfsi.webp)
![Figure 4. Dependence of molar conductivity () on temperature for neat [MPI][TFSI] and LiTFSI-doped [MPI][TFSI]](https://thumb-us.123doks.com/thumbv2/123dok_us/1907443.149107/9.596.26.571.377.584/figure-dependence-molar-conductivity-temperature-tfsi-litfsi-doped.webp)
![Figure 5. Walden plots for neat [MPI][TFSI] and LiTFSI-doped [MPI][TFSI], where is the equivalent conductivity and -1 is the fluidity](https://thumb-us.123doks.com/thumbv2/123dok_us/1907443.149107/10.596.101.476.401.678/figure-walden-plots-tfsi-litfsi-equivalent-conductivity-fluidity.webp)
![Figure 7. Dependence of molar conductivity (NMR) on temperature for neat [MPI][TFSI] and LiTFSI-doped [MPI][TFSI]](https://thumb-us.123doks.com/thumbv2/123dok_us/1907443.149107/13.596.126.425.466.692/figure-dependence-molar-conductivity-temperature-tfsi-litfsi-doped.webp)
![Table 7. Experimental self-diffusion coefficients D (cm2 s-1) and ion transference number t at 303 K for LiTFSI-doped [MPI][TFSI] and neat [MPI][TFSI]](https://thumb-us.123doks.com/thumbv2/123dok_us/1907443.149107/14.596.24.574.538.737/table-experimental-diffusion-coefficients-transference-number-litfsi-doped.webp)
![Table 9. VTF equation parameters of self-diffusion coefficient data (D = Do exp[-B’/(T – To)]) from Li+ of LiTFSI and (MPI+ + TFSI– + Li+) of (LiTFSI and [MPI][TFSI])](https://thumb-us.123doks.com/thumbv2/123dok_us/1907443.149107/15.596.54.541.547.735/table-equation-parameters-diffusion-coefficient-litfsi-tfsi-litfsi.webp)
Related documents
Bei den Lehrproben ist mir wichtig, dass es den Re- ferendaren gelingt, ihre Schülerinnen und Schüler ko- gnitiv und emotional zu fordern, indem für Jugendli- che relevante
A combination of non-compensatory multi criteria analyses and decision tree training is used to derive junction design rules using operational, safety and emission performances of
The results above indicate that a rule based ap- proach backed by rich lexical data can perform well on disparate text types and annotation schemes. By
Certainly an exemption for export cartels seems just as inconsistent with the objective of free trans-Tasman trade as do anti-dumping laws, at least where the goods
Byrne and Davis (2004) examined the inflation-investment nexus for United States using permanent and temporary inflation uncertainty and reported of significant
To effectively manage the traveling route problem, many researchers have devoted themselves to this area. How to establish a reasonable traveling route has caused hot dis-
The Figure7 given below shows the circuit diagram of the power circuit of the DC electronic load in which regulated +12v is been generated using a rectifier and a regulator
Using the Permanent Magnet Synchronous Generator (PMSG) the design can be even more simplified. However, the recent advancements in power electronics and control strategies
