• No results found

Sn-Cu Alloy Materials with Optimized Nanoporous Structure and Enhanced Performance for Lithium-Ion Batteries Prepared by Dealloying

N/A
N/A
Info
Download
Protected

Academic year: 2019

Share "Sn-Cu Alloy Materials with Optimized Nanoporous Structure and Enhanced Performance for Lithium-Ion Batteries Prepared by Dealloying"

Copied!
10
0
0

Loading.... (view fulltext now)

Download now ( 10 Page )

Full text

Loading

Figure

Table 1. Bath composition for electrodeposition of different Sn-Cu alloys
Figure 1. XRD patterns of the as-deposited Sn-Cu alloys and nanoporous Sn-Cu alloys
Figure. 2 SEM images of the Sn-Cu alloys before and after electrochemical dealloying
Figure 3. Cyclic voltammograms of A1, A2, B1, B2, C1, and C2
+3

References

Download now ( PDF - 10 Page - 767.99 KB )

Related documents

Cross Sectional Distributions of Mechanical Properties of Fine Cu Sn Alloy Wire Manufactured by Continuous Rotary Draw Bending

Fig. 9 Relationships between mean grain size and 0.1 % proof stress on inside and outside of bend, and coarse-grain Cu ­ 0.3 mass % Sn alloy materials cited from Aoyama and Urao.