• No results found

A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties

N/A
N/A
Protected

Academic year: 2019

Share "A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties"

Copied!
193
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1. (A) A layered manufacturing (LM) paradigm (B) Generic fixturing [9].
Fig 7. A schematic diagram contrasting the effects of solubility on densification or swelling
Fig. 8. Typical microstructure of a LPS system with the phase diagram characteristics shown in
Fig. 10. Processing window for single layer parts made in (A) air atomised pure aluminium (AL-1) (B) gas atomised pure aluminium obtain the applied energy density)
+7

References

Related documents

With AIM, we envisage greater ministry partnership in training missionaries that will be sent out by AIM as professional workers, but supplementing our teaching with a course

GVP data were obtained for cattle and calves slaughtered, but value added and employment data were obtained for ANZSIC industries 0122 (Grain-sheep-beef), 0123 (Sheep-beef) and

To explore the relative performance of the two methods further, we conducted additional simulations with e β = 4 under an “intermediate event rate” scenario with n = 500,

Also, Banwait and colleagues had evaluated the effect of single epidural bolus dose of magnesium when added to epidu- ral fentanyl for postoperative analgesia in 60 patients under-

separate review under the Saferian standard. Here, by contrast, the circumstances are precisely those in which the substantial risk standard and the Saferian standard diverge. I

While in the <=-5 o C temperature category the CSI HMP45CF/WS/NA A sensor had the highest operational comparability score and consequently was shown to compare the worst with the

– The host pipe contains intruding defects (broken pipe, taps) that bulge the liner. • LFDC

Twelve large granitoid intrusions (Queimadas pluton, Bom Jardim complex, Toritama complex, Timba´uba pluton, Tabira pluton, Itapetim complex, Fazenda Nova complex, Campina