• No results found

Design study of a regenerative pump using one-dimensional and three-dimensional numerical techniques

N/A
N/A
Protected

Academic year: 2019

Share "Design study of a regenerative pump using one-dimensional and three-dimensional numerical techniques"

Copied!
11
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1:  The regenerative pump
Figure 3:  CFD Grid arrangement
Fig. 5 shows the comparison between both pumps and the tools for performance prediction
Figure 7:  Regenerative Pump helicity contours plot.
+3

References

Related documents

Abstract: The aim of this paper is to present, in a descriptive perspective, the women’s participation in Romanian politics, with a closer attention to local government.The

Rumex hastatus crude methanolic extract (Rh. Cr), subsequent fractions; n-hexane (Rh. Chf), ethyl acetate (Rh. EtAc), aqueous fraction (Rh. Aq), crude saponins (Rh. Sp) and

JoTT a fl flows unres ftr ficfted use o ff arfic fles fin any med fium , reproducfion , and d fisftr fibufion by prov fid fing adequafte cred fift fto fthe aufthors and

lucidium was determined using standard methods, the antioxidant activity was evaluated by DPPH free radical scavenging assay, the cytotoxic effect was conducted by

Using succinct randomized encodings, we can roughly show that given KDM-security for circuits of some fixed polynomial size s (such as the scheme of [BHHI10]), can be amplified

The Canadian Chiropractic Examining Board (CCEB) is now in its fortieth year of providing quality measurement and evaluation services to the chiropractic profession in Canada..

The optimal thickness of realistic materials is usually below 0.5 mm thin coatings were reported to exhibit both better performance and durability.The coating of high heat