• No results found

Microstrip Array Antenna Design With EBS Structure At 28 Ghz

N/A
N/A
Protected

Academic year: 2019

Share "Microstrip Array Antenna Design With EBS Structure At 28 Ghz"

Copied!
24
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.1 : Antenna application
Figure 1.2 High Gain Antenna
Figure2.1: The timeline plan of 5G Development
Table 2.1: Standard parameter for 28GHz ( Ref :ITU-R WP5D, Aukland ,27 Feb-4 March 2015

References

Related documents

Micro s trip antenna was a simple antenna that consists of radiated patch component, dielectric substrate and ground plane. The radiated patch and ground plane is a

Abstract: In this a patch array antenna and a slot antenna capable of super high frequency (SHF) operation is designed and analysed. A new patch element is proposed to produce

On The Design of Array Microstrip Antenna with S-Band Frequency for Radar Communication.. To cite this article: A Faroqi et al 2018

The performance comparison of the proposed loaded antenna array and conventional unloaded antenna array shows that metamaterial has a good potential to reduce the mutual

In this paper a rectangular patch fed with microstrip feed line has been used to increase the bandwidth and multi resonant nature of the antenna array.. The

Gain (directive gain) is the antenna character associated with the ability of the antenna to direct its signal radiation, or receive signals from a particular

Desired patch antenna design is simulated by using high frequency simulation software and patch antenna is designed as per requirement.. The antenna has been

A new method for suppressing surface waves on a microstrip antenna array at millimetre- wave frequency is presented and how multiple CSRR improves the results like