• No results found

Develop A 5.8ghz Antenna Using Microstrip Technologies

N/A
N/A
Protected

Academic year: 2019

Share "Develop A 5.8ghz Antenna Using Microstrip Technologies"

Copied!
24
0
0

Loading.... (view fulltext now)

Full text

Loading

References

Related documents

For the proposed work, radial basis function neural network (RBFNN) is preferred to model the microstrip line feed slot-loaded patch antenna.. Feed forward neural networks with a

Abstract —A novel wideband microstrip patch antenna with nonuniform transmission line feed is presented using model predictive control.. Nonlinear model predictive control (NMPC)

The proposed antenna consists of a patch integrated with a truncated square slot and is electromagnetically coupled to a single microstrip transmission line for operation in

The antenna is comprised of a 50 Ω microstrip feed-line and fourteen rectangular patch elements, twelve of which are fed by edge-coupling from the microstrip feed-line and two of

Keywords: Microstrip patch antenna, Transmission line model, IE3D Electromagnetic Simulation..

power (matching of the feed line with the input impedance of the antenna). In this paper, microstrip feed line is used. Here there is microstrip feed line to which signal

Microstrip Line Feeding Method, Aperture Coupled Microstrip ,Feed Method Proximity Coupling Probe Coupling Method: Coupling of power to the microstrip patch antenna

A microstrip rectangular patch antenna that feed by microstrip line has been designed, simulated and compared with the single rectangle antenna. The performance