• No results found

Heating schemes and process parameters of induction heating of aluminium sheets for hot stamping

N/A
N/A
Protected

Academic year: 2019

Share "Heating schemes and process parameters of induction heating of aluminium sheets for hot stamping"

Copied!
11
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Material properties.
Fig. 1. Illustration of the cross-section of an induction coil.
Fig. 2. Two types of coil arrangements for induction heating.
Fig. 4. A model of the induction heating with motion of the blank.
+6

References

Related documents

FOUR YEAR ADDITIONAL COMPRESSOR WARRANTY: Glastender will warrant to the original user the compressor for all self- contained refrigeration models for an additional four

Note: The CP MG card functions as the Co-resident Call Server and Signaling Server, and the Gateway Controller while occupying Slot 0 in a Media Gateway..

The model allows teachers, students and groups, actively participate in the process of creative solution search, through ideas management and assessments according to

For bundling practices, the de- bate over the adequate standard of foreclosure has focused on the fol- lowing two questions: (i) should the foreclosure effect be presumed from

Louisiana State University’s Formula SAE team, TigerRacing, depends entirely on sponsorship in the forms of money, parts, and services from individuals

Gertsen (1990) proposes a quaternary typology of the methods of training. At first, she distinguishes two kinds of training: 1) conventional training by which the

Starting from the date of the announcement of the General Meeting of Shareholders, the following documents are made available for the review of shareholders at the

Accidental laptop damage: Students who have repeated instances of accidental laptop damage may be asked to check their laptop in at the Arcadia Server Room after school and will