• No results found

Electrochemical Corrosion and Wear Behavior of an Ultra-thin DLC Film Deposited on Different Annealing Ni-P Layers on Al- Mg Alloy in NaCl Solution

N/A
N/A
Protected

Academic year: 2019

Share "Electrochemical Corrosion and Wear Behavior of an Ultra-thin DLC Film Deposited on Different Annealing Ni-P Layers on Al- Mg Alloy in NaCl Solution"

Copied!
16
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Chemical composition of electroless Ni-P plating solution.
Figure 1. (a) Cross-sectional SEM photomicrograph and (b) EDS elemental analysis of electroless Ni-P coatings annealed at 280°C
Figure 2. (a) Cross-sectional SEM photomicrograph and (b) EDS elemental analysis of electroless Ni-P coatings on which DLC films were deposited, annealed at 280 °C
Figure 3. XRD spectra of annealed electroless Ni-P coatings.
+7

References

Related documents

The version presented in WRAP is the published version or, version of record, and may be cited as it appears here.For more information, please contact the WRAP Team

producten die in eerste instantie niet bedoeld zijn voor het tonen van kunstwerken kunnen oplossingen naar voren komen die nog niet eerder zijn toegepast.. De marktanalyse

seeds of transgenic plants to study the effects of VfACBP expression on seed lipid fatty

The EU Leonardo da Vinci programme launched in 1995 is about the implementation of a Community policy for vocational training. One of its central concerns has been to promote

The electrochemical noise measurement technique has been successfully used in various corrosion monitoring processes such as pitting, general corrosion and crevice

with an objective to A Comparative clinical study of Veertarvadi gana kashaya and Matra.. Volume 7, Issue