Process parameter modeling for nanocrystalline ceria based thin films prepared via aerosol jet printing

8-mol% Y doped ZrO 2 is the usual electrolyte used for high-temperature solid oxide fuel cells due to its high ionic conductivity, stability and compatibility with electrode

Three-generation power plants with high-temperature solid oxide fuel cells (TPFC) are a combined power plants for production of electrical and thermal (heat)

Energy and exergy-based working fluid selection for organic Rankine cycle recovering waste heat from high temperature solid oxide fuel cell and gas turbine hybrid

solid oxide fuel cells (SOFCs) operating at high temperature ( T > 850 C) due to its high thermal and chemical stability and catalytic activity for oxygen reduction in

Yttria-stabilised Zirconia (Y SZ) is likely to remain the material of choice for the electrolyte in Solid Oxide Fuel Cells (SOFC), due to its high oxide-ion conductivity at

The nickel based nano particles have wide applications in view of their catalytic, magnetic and semi conducting nature. They are used as electrodes in solid oxide fuel

The aim of this thesis is to complete a study on two types of these fuel cells; high temperature solid oxide fuel cells (SOFC) which are being utilised for industrial and housing

As Solid Oxide Fuel Cells require very high temperature in order to utilize the Natural Gas in its operation with a minor loss in the heat, an excessive