• No results found

The effect of clearance between tappet insert and camlobe on the tribological and tribochemical performance of cam/follower surfaces

N/A
N/A
Protected

Academic year: 2019

Share "The effect of clearance between tappet insert and camlobe on the tribological and tribochemical performance of cam/follower surfaces"

Copied!
31
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1. The motored single cam rig: (a) 2D-schematic diagram (b) photograph of the rig
Table 1. Single cam rig experiment cycle
Fig. 2. Effect of clearance on valve spring
Fig. 3. Typical wear scar of MnPO4 tappet insert
+7

References

Related documents

 “how to mine a content-area text for potential grammatical and lexico-grammatical items to teach; how to explain and practise structures within the rich context in which they were

In the I 950's the British developed a technique in which very large doses of curare were used in combination with nothing more than nitrous oxide to produce

Twenty-five percent of our respondents listed unilateral hearing loss as an indication for BAHA im- plantation, and only 17% routinely offered this treatment to children with

This article describes the construction of a prototype using the Arduino platform, in conjunction with Fault Identifier Equipment (FI), in order to facilitate the

cerevisiae , Pil1 but not Lsp1 is essential for proper eisosome assembly (28, 53). nidulans the absence of PilA does not markedly affect the localization of its paralogue, PilB,

There are infinitely many principles of justice (conclusion). 24 “These, Socrates, said Parmenides, are a few, and only a few of the difficulties in which we are involved if

Object that enters newly in the field of view of any one of the cameras and is visible in any other camera, at the same time instant or any other time instant then

Notes: In addition to being an alternative bactericidal mechanism of clinically traditional antibiotics, ROS generation is the antimicrobial mechanism of HBOT, medical honey,