• No results found

In-situ Si/Al composite produced by semisolid metal processing

N/A
N/A
Protected

Academic year: 2019

Share "In-situ Si/Al composite produced by semisolid metal processing"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.—As-cast microstructures of the samples without (a and b) and with (c and d) AlP refinement, (a and c) were with low cooling rate; and (b and d) were with high
Figure 2.—Semisolid microstructures after isothermal holding at 570°C for 10 min. (a) and (b) were AlP free, and (c) and (d) were AlP refined
Figure 4.—primary aluminium precipitation, (b) point B: during growth of primary aluminium Quenched microstructures from points defined in Fig

References

Related documents

Upon review of P&N's processes to perform and review background checks on personnel working on the Settlement Program, we noted that of the 78 reviewed, 63 exceptions were

 Significance of the repealing clause: the presence of such general repealing clause in a later statute clearly indicates the legislative intent to repeal all prior inconsistent

to remove metals from mixed metal solutions that also contained dissolved organic

Installation of greywater systems Operation & maintenance issues Water saving figures..  Ongoing greywater research

Still,  this  does  raise  the  question  of  what  would  happen  should  one  or  more  Eurosystem 

Random sampling of combinations of site conditions and load parameters is performed in order to classify the effects of parameter scattering on the stress variability by means

The number of logarithmic cycles (LDec) of LPS destroyed by exposure to the dry-heat treatments was calculated from the heat penetration curves by using conventional thermal

HelioPower's team includes Certified Energy Managers, licensed Professional Engineers, master Energy Economic analysts, accomplished Software Developers, Accountants,