• No results found

Comparing Electrochemical Behaviour of Amorphous Ni–P Powders and Film

N/A
N/A
Protected

Academic year: 2019

Share "Comparing Electrochemical Behaviour of Amorphous Ni–P Powders and Film"

Copied!
16
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Chemical composition and operating conditions of the electroless nickel deposition bath
Figure 1.  XRD patterns of powder and film samples.
Figure 2. SEM images of powder sample (a and b) and film sample (c and d). EDS of A point: cP = 16.72 at%, B point: cP = 8.9 at%
Figure 3.  TEM images and the corresponding selected area electron diffraction (SAED) patterns of (a) powder sample, and (c) film sample
+7

References

Related documents

correlations between absolute amount of logMAR improvement and threshold change, initial logMAR acuity, logMAR improve- ment in the fellow eye, number of sessions, session

ther comparing the resulting simulation uncertainty (Fig. 7), we find that the final parameter sets that were found using the entire observed time series, including the

Lead determination in water samples is a two-step procedure. First step is adsorptive preconcentration of lead at open circuit potential onto Au/CA/NTA electrode

3. In the EU, the attempt to crack down on harmful tax competition is based on a three- pronged tax policy package. The bundling of three different proposals is still a cause

The effects of synthesis parameters such as pulse height (current amplitude or current density), pulse frequency, solution temperature, potassium hydroxide

At higher current intensity, the reactions such as the evolution of hydrogen at the cathode (Eq.7) and the oxidation of ferrous ions on anode can be also enhanced via

of returns to education, as estimated by a basic human capital earnings model, are of the same order of magnitude in the transition economies.. of Russia and Poland,

results in the literature [35, 44, 48] are in agreement with the results obtained here, where Pt/C showed the lowest ring current and the highest disc current and Co/C prepared by