• No results found

Optimization Of Mechanical Coupling In Electric Vehicle (ev)

N/A
N/A
Protected

Academic year: 2019

Share "Optimization Of Mechanical Coupling In Electric Vehicle (ev)"

Copied!
24
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2.1.1 below.
Table 2.3.1: The gear ratios of the 5-speed manual transmission
Figure 2.4.1: The design of the adapter plate by using Catia.
Figure 2.5.1: The side view of Shaft Coupler

References

Related documents

In this work, two new kinds of graphene based materials, thermally reduced graphite oxide (T-RGrO) and ascorbic acid multi-phase reduced graphene oxide (AMP-RGO),

Provisioning (goods directly acquired from nature, e.g., food, freshwater and timber) Regulating (control of natural processes, e.g., air quality regulation, carbon

In contrast to other seawater bodies with 3.5% salinity, the recreational waters in the southern coast of the Caspian Sea possess its own salinity (about 1% w/v) and thus

In theory, FRET is a radiationless energy transfer process, so ideally, a single emission spectrum of the output fluorophore should be observed, as illustrated in Fig.2.7

These values are compared with RMSE values calculated between Hata suburban model, where the correction factor given in (3) is used for Hata model, and the measured path loss

ABSTRACT :For the Daubechies wavelet transforms, the scaling signals and wavelets have slightly longer supports, i.e., they produce averages and differences using just

The experimental observations are presented for the breakage of Isoelectric Soya protein precipitate in suspension in mechanically agitated vessels under turbulent

looking at mammographic density in 206 BRCA1 and BRCA2 carriers compared to non-carriers found a significant association between increased breast cancer risk and increasing density