• No results found

A high specific strength, deformation processed scandium titanium composite

N/A
N/A
Protected

Academic year: 2020

Share "A high specific strength, deformation processed scandium titanium composite"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table I. By comparison, the maximum specific strengthattainable in Ti–6Al–4V (in the solutionized 1 agedcondition) is typically about 265 J�g with 25% reduction
FIG. 3. Relation between phase size and deformation processed truestrain. Open circles are Sc mean phase thickness; closed symbols areTi mean phase thickness

References

Related documents

Conclusions: Using dexmedetomidine as an adjuvant to bupivacaine for spinal anesthesia in lower limb surgeries has longer duration of sensory and motor block and longer

To conclude whether Keplerian motion from orbiting planets is the origin of this radial velocity variations, all activity compo- nents from the signal must be identified and removed.

When the findings of the present research is evaluated as a whole, on the basis of the findings collected from questionnaires, interviews, and observations, it might be said

Stanton, Salmon, Rafferty, Walker, Baber and Jenkins (2013). Human factors methods. A practical guide for engineering and design. Interorganizational complexity and

And a hint of my conclusion: that Social Forums, while opening significant networking opportunities for those able to participate (see Juris and Mueller, this issue), tend to

These charges very according to passenger capacity of the vehicle and size of group being transported.* Please keep in mind that numbers listed above are to assist the residents

Ozono, que deve ser adicionado fora dos tanques de modo a que nos circuitos de retorno e à entrada, a concentração residual seja inferior a 0,01 mg/l.. 15