• No results found

Flow measurements in the discharge port of a screw compressor

N/A
N/A
Info
Download
Protected

Academic year: 2019

Share "Flow measurements in the discharge port of a screw compressor"

Copied!
16
0
0

Loading.... (view fulltext now)

Download now ( 16 Page )

Full text

Loading

Figure

Figure 1: Screw compressor working principle
Figure 2: flooded and dry screw compressor types
Figure 3 : Optical compressor equipped with transparent windows near the discharge;
Figure 4: Geometry of the compressor at the outlet port: (a) Transverse-section of the discharge (b) W section view, (c) V section view; (d) Actual discharge port viewed from rotors side; (b) Actual discharge port viewed from cavity side
+7

References

Download now ( PDF - 16 Page - 1.44 MB )

Related documents

HEAT TRANSFER AND CU-WATER NANOFLUID FLOW IN A VENTILATED CAVITY HAVING CENTRAL COOLING CYLINDER AND HEATED FROM THE BELOW CONSIDERING THREE DIFFERENT OUTLET PORT LOCATIONS

At this two values of Richardson number (Ri=0.1 and 1), the outlet port position (Fig.4: case A, B and C) has not a significant effect on the streamlines distribution near the

Near-wake analysis of actuator line method immersed in turbulent flow using large-eddy simulations

The energy spectra for the shear layer flow based on the time series of the axial velocity component at different points in the near wake ( x/R = {− 0.. The impact of the rotor

Numerical Simulation of Flow Field in Spiral Separator

Separator, role in the spiral structure in the fluid along the inner wall of the separator is spiral flow, spiral flow axial velocity from the inlet to the outlet is obviously