• No results found

Physical and rheological characterization of carbonated bitumen for paving applications

N/A
N/A
Protected

Academic year: 2020

Share "Physical and rheological characterization of carbonated bitumen for paving applications"

Copied!
38
0
0

Loading.... (view fulltext now)

Full text

Figure

Figure 1.  CO2 pressure-temperature phase diagrams (after Jacobs, 2005).
Figure 3.ACCEPTED MANUSCRIPT  Schematic of the CO2 system used for modifying bitumen.
Figure 7.ACCEPTED MANUSCRIPT  Fick’s law fit to CO2 uptake showing a good fit. Data for 190 pen at 25°C and 40 psi
Figure 8.ACCEPTED MANUSCRIPT  Desorption rates of CO2 from modified bitumen under ambient conditions
+7

References

Related documents

Thus, the body of this dissertation includes: (1) synthesis of magnetic nanoparticles (MNPs) with high magnetic moments; (2) emulsion-based bottom-up assembly approach to design

(bulk electronic waste) Includes used products and parts that have been returned to Canon and which cannot be reused and products and parts that have been written off as well

The measured individual workload factors when examining the virtual ovaries will significantly decrease as the participants receive more simulator training.. Participants’

Analysis indicated that 64 respondents (83%) believed that the appropriate career path was through qualification as a chartered physiotherapist, followed by post-graduate

Most of the larger Ayurvedic medicine suppliers provide materials other than Ayurvedic internal medicines, particularly in the areas of foods and toiletries (soap,

To prevent big costs installing additional cables in the future, it makes good sense to install large fiber count cables the first time; how- ever, terminate only the fibers

Significant changes in navigational parameters (reduced draft or speed) cause that the hull optimized to ensure minimum losses in flow and thus resulting in low

ƒ Editing and compiling technical reports concerned with all matters pertaining to the marine oil industry, but predominantly involving loss control, vessel inspection, vetting