• No results found

Design Of Wide-Band Monopole Antenna For Indoor Multi-Operations Applications

N/A
N/A
Protected

Academic year: 2019

Share "Design Of Wide-Band Monopole Antenna For Indoor Multi-Operations Applications"

Copied!
24
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2.1 different shapes for microstrip antenna
Figure 2.4 H-plane and E-plane of a microstrip antenna
Figure 2.5 Beam-width of the antenna
Figure 2.6 circular polarization
+7

References

Related documents

Recently, single feed circular patch antenna with circular polarization was proposed by embedding circular holes in microstrip resonator [13].. Simply embedding

A penta-band E-shaped printed monopole antenna loaded with narrow slots and stubs suitable for MIMO application has been presented.. Six array configurations of such two antennas

Based on the configuration of a CPW fed monopole antenna with impedance bandwidth enhanced, a piece of pentagonal slotline and a pair of inverted L-shaped stubs were loaded on the

Abstract —A dual-band circularly-polarized microstrip antenna is proposed, and the antenna for GPS is designed. The radiation characteristics of the dual-band circular polarization

Wide band balance antennas, low profile antenna, unbalanced antenna , VSWR, radiation pattern, Return losses, 2D and 3d Polar / Radiation plots, prototyping, current

Radiation Pattern of Proposed Antenna: (a) Principle Plane Cut, (b) Conical Plane Cut, (C) Polarization in Principle Plane Cut and Conical Plane Cut, (d) Theta and Phi is fixed

For a linearly polarized antenna like the half wave dipole, the E-plane pattern is termed as “a plane containing the electric field vector and the direction of maximum radiation”

The design antenna shows a directional radiation pattern, in other words, an antenna radiates in a particular direction and operate its own center frequency at