• No results found

Assessment Of Whole Body Vibration Exposure Among Metal Stamping Operators

N/A
N/A
Protected

Academic year: 2019

Share "Assessment Of Whole Body Vibration Exposure Among Metal Stamping Operators"

Copied!
24
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.1: A machine operator is exposed to WBV during metal stamping process.
Figure 1.2: Structure of the Project CHAPTER O�E
Figure 1.2: Structure of the project.

References

Related documents

This paper examines hacker behavior in dark forums and identifies its significant predictors in the light of “leadership theory” for “communities of practice.” We

monitoring sites urban increment hot spot increment total urban contribution relevant for AQ LV compliance PM10 [µg/m³] urban background regional background

The goal of this learning block is to assess candidates’ knowledge of the essential management of order fulfillment and customer service processes in customer relationship

Studies were included in the meta-analysis if they met the following criteria: (1) written in English, (2) published (or conducted) in 1980 or later, (3) included at least

Based on the BSL-3 lab test observations of door swing effect on room pressure, we recommend for a negative or positive pressure room that the entry doors be gasketed, slid-

With the esters ’ dosage of 0.1%, methyl tartaric, ethyl tartaric, propyl tartaric, butyl tar- taric, amyl tartaric, hexyl tartaric and decyl tartaric can depress the saturation