• No results found

Optimization of Gas Turbine Blade Cooling System

N/A
N/A
Protected

Academic year: 2020

Share "Optimization of Gas Turbine Blade Cooling System"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 3: Turbulence due to pin fins.
Figure 4: Cooling air passage
Table 2: Thermal physical properties of air at 644K. Density
Figure above shows heat flux dissolute from coolsurface of  blade. It is very apparent for round ducted blade and fairly only small rakishness of thermal energy owing to cool surface of blade

References

Related documents

It was possible to improve the production process by applying the simulation technique, which shows that the general objective was achieved. Also, it was possible to

patient is worse in June and gives a positive skin test to grass pollen, grass pollen is given as part.. of

Skinner’9 reported 28 cases of clinical diphtheria and virulent carriers treated with intramuscular penicillin with definite benefit.. He thought that 100,000 units per day should

In order to test the stability of reconstituted suspensions, the samples were kept at three controlled temperatures, namely room, refrigerated and elevated (40ºC)

Field experiments were conducted at Ebonyi State University Research Farm during 2009 and 2010 farming seasons to evaluate the effect of intercropping maize with

AIRWAYS ICPs: integrated care pathways for airway diseases; ARIA: Allergic Rhinitis and its Impact on Asthma; COPD: chronic obstructive pulmonary disease; DG: Directorate General;

It was decided that with the presence of such significant red flag signs that she should undergo advanced imaging, in this case an MRI, that revealed an underlying malignancy, which

Technical aspects of HER2-IHC are robust and can be standardized by validated protocols, on-slide control tissue and external quality assessment [ 20 – 22 ] but interpretation of