• No results found

Palladium Particles Based Nano Films; Electrochemical Fabrication, Characterization and Applications

N/A
N/A
Protected

Academic year: 2019

Share "Palladium Particles Based Nano Films; Electrochemical Fabrication, Characterization and Applications"

Copied!
16
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.  (A) CVs of Pd particles deposition process on PA modified GCE in 0.5 M H2SO4 containing 1 × 10-3 M potassium tetra chloro palladate (II), with a repetitive potential scan between 1.2  and -0.25 V (at 0.1 V s-1) for three cycles
Figure 2. (A)  Different scan rate studies of PA-nano Pd film modified GCE in pH 7.0 PBS solution (0.01, 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.1, 0.11, 0.12, 0.13, 0.14, 0.15, 0.16, 0.17, 0.18, 0.19 and 0.2 V s-1)
Figure 3.  (A)  AFM two dimensional view of PA film, (B) PA-nano Pd film.
Figure 4.  (A)  AFM two dimensional view (multicolor) of NDGA film, (B) NDGA-nano Pd film
+6

References

Related documents

The calculated integrated pollution indices showed that in- vestigated soil samples were varied from considerable contamination according to potential ecological risk index (PRI)

After a 100-s unilateral sustained maximal voluntary contraction (MVC) of knee extensors, the cross-over effect of muscle fatigue in the resting contralateral limb was observed to be

Celkové počty poražených prasat byly v uvede- ných letech velmi rozdílné. Důvody této variability byly různé, ale přetrvávaly a prohlubovaly se zhor- šené situace na

The objective of the present study was to create a robust US-based cost-effectiveness model that incorporates patient adherence to testing for infection to understand the

generation in a high-Q lithium niobate microresonator fabricated by femtosecond

In order to access the feasibility of a determination of the EoS in 3-flavour QCD with Wilson fermions and SBC, the first crucial issue to be addressed is the computational e ff