• No results found

A Penta-Band Printed Monopole Antenna for MIMO Applications

N/A
N/A
Protected

Academic year: 2020

Share "A Penta-Band Printed Monopole Antenna for MIMO Applications"

Copied!
14
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. E-shaped monopole antenna, (a) without slot, (b) with slot and stub and surface currentdistribution on the E-shaped monopole antenna with slot and stub (c) at 3.5 GHz and (d) at 5.8 GHz.
Figure 2. Simulated (S) reflection coefficients of the E-shaped antenna, (a) without slot, with singleslot and single slot with a stub, (b) with two slots and single stub and Simulated (S) and Measured (M)reflection coefficient of the E-shaped antenna with two slots and two stubs.
Figure 3. E-shaped monopole antenna, (a) with two slots and single stub, (b) with two slots and twostubs.
Figure 5 shows the simulated and measured reflection coefficients of the penta-band E-shapedprinted monopole antenna along with the shape of the relevant antenna
+7

References

Related documents

things and artifacts to posit that artifacts have internal teleology just as living

(A) Misexpression of CHE-1 and F1 RNAi against the histone chaperone gene lin-53 (Caf1p48/RBBP4/7) on solid worm growth media allows germ cell conversion (GeCo) to ASE neuron-like

The Figure 1 shows the design of the final product from the U bending. The material of the sheet was mild steel with 2mm thickness. The product consists of blanking,

Design of the accurate part : Ripple carry addition is the most power saving conventional addition technique .the Ripple carry adder is built from cascading the

[6]In this approach offer attention to Associate in nursing administration drawback IEEE 802.11 Wireless LANs suffers by. IEEE 802.11featured with permanent keys

With the wide application of distributed generation (DG) sourcecongestion management is done by optimumplacement of DG in the distribution network.As it is known

This work focuses on developing a framework for calculating hydrogen solubility based on environmental conditions and the formation energies of its point defects, and then applying

CHAl is probably the structural gene for the enzyme; it is an abundant RNA in cells grown with serine and threonine as nitrogen source, whereas it is not