User Manual. Model: FI8918E. Indoor Pan/Tilt PoE Camera

Therefore, in this study, we propose a sensitive and disposable electrochemical sensor for the detection of Hg(II) in various water samples using polypyrrole (PPy)

Double click on the IP Camera that you just saved networking settings on, and click on the "WIFI" tab to enter to the “Wi-Fi” interface, select the check box to enable

Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose

Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then select Upgrade Firmware and enter the username and password, choose

S Step tep tep tep 1: 1: 1: 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP address, and click on ”Network Configuration”,

This camera supports HTTP Port and Media Port. The Media port is used to view the camera‟s video stream, HTTP Port is used to access the camera remotely. If you want to

Upload Image Now: It will upload images when you selected it. Here Upload Interval refers to the time between the current image and the next image.. NOTE: Here upload image now

You can access the camera through the IP Camera Tool or IP Camera Tool, Internet Explorer,, Firefox, Google Chrome, Safari or other stand browser directly. 1) Using the IP Camera