• No results found

Assessment of cooling methods for increased power density in electrical machines

N/A
N/A
Protected

Academic year: 2020

Share "Assessment of cooling methods for increased power density in electrical machines"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 2. The indirect-cooled PMSM, with the coolant flow paths indicated onthe right.
Fig. 4.Thermal paths from the rotor to the coolant for the water jacketmachines. The lower image shows the resistance paths used for calculatingthe overall thermal resistance.
Fig. 5.Main Effect Plots for the normalised maximum Stator temperaturefrom the DOE, showing the average maximum Stator temperature at eachvariable value.
Fig. 8.Impact of the stator slot copper insert on the stator hot-spottemperature.
+2

References

Related documents

It is even stranger when one looks at the composition of the company where there are as many experienced female dancers as male, with an equivalent number who have had

Relationship between inter-occupational wage inequality and level of protection average tariff rate in poor and rich countries.. Change in average

Especially, this document describes the quality assurance process for the production, review, and approval of the deliverables which have to be submitted to the

A Monte Carlo simulation method was subsequently used to extrapolate the survival rate for up to 600 months, to derive the life expectancy for different types of occupational

The current study adds to the existing literature on trauma and physical health by testing a reciprocal relationship between physical health problems and posttrauma appraisals

Utility Name Utility Provider's Address Address of Location Services Service Provided Account # 1.. CROWN

OS – OSMOTIC DRYER, DV – HEAT EXCHANGER, K – BOILER (BIOMASS AS FUEL) CP – CIRCULATION PUMP, KS – TO CONVECTIVE DRYER, SV - AIR SOLAR HEATER COMBINE TECHNOLOGY. COMBINE TECHNOLOGY