• No results found

User Manual. powered by

N/A
N/A
Protected

Academic year: 2021

Share "User Manual. powered by"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

(1)

powered by

(2)

Congratulations on purchasing the most user friendly and compatible SPL Meter on the market.

Here’s what you need to do in order to start using your device:

1. Package contents

• SSA APM-2 SPL Sensor

• Carry Bag

• Quick start guide

• User Manual

2. Get the App!

Get the SSA Studio app for your device. The app is available on Google Play, Apple App Store and Microsoft Store. Or scan the following QR

code: Pairing code: 000000

(3)

3. App features 3.1. Devices

This is where you find powered devices. You have to connect a device before starting to use the app.

Note for Android 6 users: Location services and location permission are required by the Bluetooth driver.

The pairing procedure is as follows:

Device OS Pairing Method Alternate Windows 10 Automatic on first

in-app connect (no pin required)

Bluetooth Settings manual pair

Android Pairing pop-up or notification on first in-app Connect

Manual pairing from Settings >

Bluetooth iOS 8.4+ Pairing pop-up on

first in-app Connect –

When connecting more than one sensor, they will be identifiable by ID LED color.

3.2. Real-time

This contains real-time scores. A score is composed of the maximum amplitude and a corresponding frequency value in the 10-100Hz range.

A peak score is the largest recorded sensor value.

This can be reset by the user from the interface.

The sensor reports a score 2 times per second.

(4)

Device specific features:

Device OS Instant/Peak

score Waveform and

Spectrogram Save score

Windows 10 Max 5 sensors No No

Android Max 2 sensors Up to 2 sensors Yes iOS 8.4+ Max 5 sensors Max 1 sensor No 3.3. Average

This mode averages scores over a configurable time period. The user can set a countdown before the measurement starts. The average score is e comprised of the average amplitude and frequency values of scores received during the measurement period.

Choosing a class will impose a win condition on the average score. If at any time during the measurement, the average score is larger than the class value, the sensor is marked as disqualified.

3.4. Basscam

Record a video with real-time sensor overlay from one or two sensors

Data available on overlay (for each sensor):

• Current score

• Peak score since video started

• Average score since video started

• Sensor color

Render speed is device dependent and requires at least a dual-core processor.

Not available on Windows devices.

(5)

3.5. Gallery

Keeps all your saved measurements and basscam videos. Tap the thumbnail to open file or swipe left on an item to get more info, share, or delete it.

Available only on Android.

*features may vary across platforms and are subject to change without notice

4. Specifications

• Frequency range: 10Hz - 100Hz

• Frequency precision: 1Hz

• Amplitude range 95.00dB - 174.00dB

• ADC Resolution 24bit

• Power supply 1x 9V Battery (not included)

• Supply voltage range: 6.0V – 16V

• Operating temperature: 0C – 65C

• Score report rate 2Hz

5. Requirements 5.1. Minimum

• Android 4.4

• Windows 10 (up to date)

•Apple iOS 8.4

• Bluetooth 4.0 capabilities 5.2. Recommended

• Android 6.0.1 or newer

• Apple iOS 9.0 or newer

• 2GB RAM

(6)

6. Troubleshooting

Issue OS Solution

No pairing

dialog Android Some Android devices display a pairing notification, alternatively, pair the sensor manually No connection

with paired sensor

All Something went wrong during the pairing process, un-pair the device manually and try again.

No connection at all or unstable connection

Android Some Android devices do not have appropriate Bluetooth 4.0 drivers.

This depends on Android device manufacturer updates.

LED blinking

blue - red Sensor Sensor error, if state persists, contact your local sales representative.

7. Support

For technical support and enquiries, please contact your local representative:

USASound Solutions Audio Inc.

www.soundsolutionsaudio.com support@soundsolutionsaudio.com

EUAuraVis S.R.L.

www.accuwave.ro support@accuwave.ro

(7)

8. Legal notices

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de-signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended.

The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux onditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that necessary for successful communication.

Conformément à la réglementation d’Industrie Can-ada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Indus-trie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisa-teurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.

(8)

References

Related documents

adipogenesis; yet, only rosiglitazone strongly enriched pathways related to brown fat differentiation and mitochondrial processes and induced brite adipocyte gene markers

Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the de- vice can analyze it and perform some response

In the first step, the related features of the classic papers in intensive care (such as paper titles, author names, paper publishing journals and citation counts) were

For maximum range between the transmitter and receiver, the transmitter should be mount- ed on a wooden post or tree (steel posts may cause interference with the radio

Our definition of the peer group (the year cohort at the individual’s school) is very common but may be incorrect, our measure of peer characteris- tics (receipt of free school

This report is issued and approved for distribution by (a) in Canada, CIBC World Markets Inc., a member of the Investment Industry Regulatory Organization of Canada (“IIROC”),

The current implementation then switches to preferring peers which it has better upload rates to, which does a decent job of utilizing all available upload capacity and preferring

Jaffe (eds) Proceedings of a Seminar on the Impact of Plant Breeders’ Rights in Developing Countries, held at Santa Fe de Bogota, Colombia, March 7-8. Amsterdam: University