Ph. D. in Electrical and Electronics Engineering Çukurova University, Adana

Çukurova University Electrical and Electronics Engineering Department Sarıcam / ADANA Phone: 0-322-338 68 68/140 GSM: 0-533-250 39 08 cbayindir@cu.edu..tr

K. Çağatay BAYINDIR

Education

Ph. D. in Electrical and Electronics Engineering 2001 - 2006

Çukurova University, Adana

M.Sc. in Electrical and Electronics Engineering 1997 - 2000

Middle East Technical University, Ankara

B. Sc. in Electrical and Electronics Department 1991 -1995

Middle East Technical University, Ankara

Experience

Çukurova University Electrical and Electronics

Engineering Department, Adana June 2009 - … Assistant Professor

Areas of Interest

Power Generation, Transmission and Distribution Electrical Power Quality

PV and Wind Energy Systems

Modeling of Power Electronic Systems

Control Applications in Power Electronic Systems Energy Management and Energy Efficiency Lectures

EEE 317 Utilization of Electrical Energy EEE 465 Power Electronics 1

EEE 464 Power Electronics 2 EEE 463 Illumination Techniques EEE 420 High Voltage Techniques EE 607 Advanced Power Electronics 1 EE 604 Advanced Power Electronics 2

Erdemir Engineering and Management Consultancy Co., October 2004– April 2009 İsdemir Office

Electrical and Automation Chief Engineer

Responsibilities

 Responsible for the execution of technology research, technical specification preparation,

tender, technical clarification, contract, basic and detail engineering, equipment purchase, erection and commissioning phases of electrical and automation part of below listed projects mainly on Electric Energy Generation, Transmission, Distribution and Utility Systems.

 Manages a team of engineers and technicians to execute the above mentioned works.

Projects

 380/154/34.5 kV GIS Substation and Erzin-Ġsdemir 380 kV Transmission Line Project

(Scope: 380 kV GIS Switchgear, 154 kV GIS Switchgear, 34.5 kV GIS Switchgear, 380 / 154 kV 250 MVA Auto Transformers, 154/34.5 kV 150 MVA Power Transformers, SCADA System, Load Shedding System, Communication Network, Protection Relays, 154 kV Cable Connections to Existing Substation).

 154 kV Substation and Static Var Compensation System

(Scope: 154 kV Switchgear, 34.5 kV Switchgear, 154/34.5 kV 80 MVA Power Transformers, 60 MVAR Static Var Compensation System).

 Modernization of 3*60 MVA and 2*25 MVA Steam Turbine Generators

(Scope: P&ID design, Turbine and Generator Control System, Governer, Exciter, Protection Relays, Vibration Monitoring System, Hydrogen Monitoring System, Instrumentation, Cabling).

 2*154/6.3 kV 55 MVA Power Transformers and Busducts.

 Ġsdemir 250ton/h no:6&7 Steam Boilers

(Scope: 6.3 kV substation, 6.3/0.4 kV Distribution transformers, MV/LV motors, DCS Control system, Instrumentation, Cabling ).

 Ġsdemir No: 6 Turbo Blower

(Scope: Turbine and Blower Control System, Governer, Vibration Monitoring System, Instrumentation, Cabling).

 3.5 million ton/year Hot Strip Mill Water Treatment Plant

(Scope: 34.5/6.3 kV 25 MVA Power Transformers, 6.3 kV Substation, 6.3/0.4 kV distribution transformers, 34 pieces MV motors, LV motors, Control System, Instrumentation, Cabling).

 Blast Furnace Gas Holder, OG Gas Holder, COG Gas Holder.

(Scope: 6.3/0.4 kV Distribution transformers, MV/LV motors, Control system, Instrumentation, Cabling ).

 Cranes

(Scope: Drives, LV Motors, Control system, Instrumentation, Cabling ).

 Ġsdemir RMS-A and RMS-B Natural Gas Stations

(Scope: LV power distribution, Control System, Measurement System, Instrumentation, Cabling ).

 Ġsdemir Proses Water Supervision System

(Scope: Control System, RF Modems, Instrumentation, Cabling ).

 Ġsdemir Power Distribution System Analysis

(Scope: Collection of power system data, Single Line Diagrams, Load Flow and Harmonic Analysis using Electrical Transient Analysis Program ETAP ).

Sasa DuPont Sabancı Polyester Sanayi A.Ş., Adana August 2000–October 2004 Utilities E&I Maintenance and Engineering Leader

Responsibilities

 Responsible for the management of E&I maintenance activities of steam vaporizers,

thermal fluid vaporizers, HVAC systems, air compressors, chillers, cooling towers, water treatment plants, tank farms.

 Responsible for the operation and maintenance of 154 kV switchyard, MV and LV systems.

 Responsible for taking the necessary actions to meet safety, plant uptime and budget

goals for the E&I Maintenance Group including routine and preventive maintenance.

 Member of Electrical Safety Committee and Energy Conservation Committee.

 Managed a team of supervisors and technicians, working seven days a week, on three

shifts. Projects

 Leaded the ISO 9002 certification of maintenance group of utilities and succeeded in

receiving the ISO 9002 in a very short period.

 Involved in the restructuring of maintenance groups in the guidance of an expert company.

Revised the maintenance plans, job plans and preventive maintenance plans for the utilities.

 Leaded the commissioning work of a thermal fluid vaporizer, two high pressure

compressors and several air handling units.

 Leaded six sigma projects on the performance improvement of thermal fluid vaporizers, on

the electrical energy optimization of cooling towers and water treatment plant and on optimization of compressed air systems

 Leaded a Process Hazards Analysis (PHA) study on the main tank farm of Sasa DuPontSA.

Applied hazards analysis techniques and prepared a report to be presented to the top management.

 Performed engineering studies towards preventive maintenance like thermographic

inspection and vibration analysis.

Şişecam Trakya Cam Sanayii A.Ş. , Mersin April 2000 - August 2000 Control Engineer

 Involved in the operation and maintenance of highly automated process control systems.

 Worked in the glass identification, cutting and packing area which was the most technology

intensive region of the plant.

 Worked in preparing routine maintenance schedules.

Mudurnu Tavukçuluk A.Ş., Bolu February 1998 – February 2000 Technology Advisor

 Worked part-time during the start-up of a poultry processing plant with engineers from

STORK, a Dutch company.

 Provided technical support to a team of technicians in maintaining and operating the

process control systems, electronic weighing and distribution systems and various meat processing machines.

 Organized the supply of spare parts and coordinated the technical relationships with

Middle East Technical University, Electrical and Electronics Engineering

Department, Ankara November 1997 - April 2000 Research Assistant

 Conducted a research on modeling and simulation techniques in power electronics.

 Designed and simulated a shunt active power filter system that cancels the current

harmonics in the power system and provides reactive power compensation.

 Attended lectures and laboratory sessions in electrical machines and power electronics

section.

Başarı Elektronik A.Ş., Ankara July 1995 – August 1996 Design Engineer

 Worked as a design engineer in Research and Development Department.

 Involved in the design of a smart card operated prepayment Energy-Hour meter.

Trainings and Seminars

 ISO 9001:2000 Quality Management System Training, 2 days, June 2007

 ISO 9001:2000 Quality Management System Internal Auditor Training, 2 days, August 2007

 Microsoft Project and Project Management, 5 days October 2006.

 SVC System Training, Nokian Capacitors Finland, 1 week September 2006

 Safety Instrumented System, Emerson, 1 day, February 2006

 STC 2000 Turbine Control System, ICS USA, 2 weeks, September 2005

 Process Hazards Analysis Leader Training, DuPont, 3 days, February 2004.

 Energy Manager Training, Eletrik ĠĢleri Etüd Ġdaresi, 2 weeks, May 2003.

 ix Sigma Training ,DuPont, 12 days, May 2001.

 Critical Factors in Management, Sabancı Holding, 3 days, October 2002.

 Skills For Being Effective, Sabancı Holding, 2 days, May 2002.

 A General Look at Human Resources, Sabancı Holding, 2 days, April 2002.

 Presentation Skills, Sabancı Holding, 2 days, January 2002.

 Emphatic Communication, Sabancı Holding, 2 days, October 2001.

 Creative Thinking and Problem Solving, Sabancı Holding, 2 days, September 2001.

 Team Leadership, Sabancı Holding, 2 days, June 2001.

 Communication and Living Well, Sabancı Holding, 2 days, May 2001.

 Turkish Economy and Future Perspective, Sabancı Holding, 2 days, March 2001.

 Group Dynamics, Sabancı Holding, 2 days, February 2001.

 Various DuPont Trainings on Safety, Health and Environment.

 Siemens S7 300/400 Training, Siemens, 1 week, Siemens, June 2000.

 Total Quality Management and Creative Thinking, ġiĢecam, July 2000 .

Publications

International Journals

BAYINDIR KC., CUMA MU, TUMAY M. Hierarchical neuro-fuzzy current control for a shunt active power filter. Neural Computing and Applications June 2006, Vol: 15, No:3-4, pp: 223-238. BAYINDIR KC., ERMIS M. Understanding the modeling and analysis of a shunt active power filter

using MATLAB/Simulink. International Journal of Electrical Engineering Education ( IJEEE) July 2006, Vol: 43, No:3, pp: 185-205.

BAYINDIR KC., TUMAY M., CUMA M.U., Fuzzy logic PWM current controller based shunt active power

filter for power quality compensation, Engineering Intelligent Systems For Electrical Engineering And Communications March 2008, Vol.16, Iss.1, pp.5-16.

TUMAY M., MERAL M.E., BAYINDIR, KC., “Extraction of Voltage Harmonics Using Multi-Layer

Perceptron Neural Network”, Neural Computing and Applications Oct. 2008 Vol. 17, Iss. 5-6, pp. 585-593.

TUMAY M., MERAL M.E., BAYINDIR, KC., “Sequence Reference Frame-Based New Sag/Swell

Detection Method for Static Transfer Switches”, IET Power Electronics, Vol. 2, Issue 4, July

2009, pp.431-442.

CUMA M.U., TEKE A., TUMAY M., BAYINDIR, KC., OZGUR M. S.,”Experimental Architecture of a DSP Based Signal Generation for PWM Inverter”, Computer Applications in Electrical Engineering, April 2009.

MERAL M.E., TEKE A., BAYINDIR, KC., TUMAY M., “Power Quality Improvement with an Extended Custom Power Park”, Electrical Power System Research, Vol.79, Issue 11, November 2009, pp.1553-1560.

TEKE A, BAYINDIR K., TUMAY M., “Fast Sag/Swell Detection Method for Fuzzy Logic Based Dynamic

Voltage Restorer”, IET Generation, Transmission & Distribution, Volume: 4 Issue: 1 2010,

pp. 1-12

International Conferences

TÜMAY M., BAYINDIR K. Ç., CUMA M. U., TOKUNÇ C. O., 2005. Dynamic Voltage Restorer with Zero Sequence Compensation. Eleventh International Conference on Electrical Machines, Drives and Power Systems (ELMA 2005) Proceedings, vol 1, pp: 98-102.

TÜMAY M., CUMA M. U., TEKE A., BAYINDIR K. Ç., 2005. Fuzzy Logic Control of Dynamic Voltage Restorer., Eleventh International Conference on Electrical Machines, Drives and Power Systems (ELMA 2005) Proceedings, vol:, pp:103-108.

TÜMAY M., TEKE A., BAYINDIR K. Ç., CUMA M. U., 2005. Simulation and Modeling of a Dynamic

Voltage Restorer. 4th International Conference on Electrical and Electronics Engineering

TÜMAY M., BAYINDIR K. Ç., CUMA M. U., 2006. A Three-Phase Four-Wire Shunt Active Power Filter with High DC Link Voltage Utilization. Artificial Intelligence in Energy Systems and Power AIESP 2006.

TÜMAY M., EKĠZ A., BAYINDIR K. Ç., CUMA M. U.,2006. Power System Harmonics and Compensation for Energy Quality and Management in Real Plants. Artificial Intelligence in Energy Systems and Power AIESP 2006.

BAYINDIR K. Ç., TEKE A., TÜMAY M., 2007. A Robust Control of Dynamic Voltage Restorer Using Fuzzy Logic. International Aegean Conference on Electrical Machines and Power Electronics (ACEMP 2007) Proceedings, pp: 55-60.

TÜMAY M., BAYINDIR K. Ç., CUMA M. U., TEKE A., 2007. Experimental Setup for A DSP Based

Single-Phase PWM Inverter. 5th International Conference on Electrical and Electronics

Engineering (ELECO 2007) Proceedings, vol: Electric Control, pp: 297-301.

BAYINDIR K. Ç., TEKE A., YIĞIT I., MERAL M. E., TÜMAY M., YALCIN B., 2007. Power Quality Survey on South Industrial Districts of Turkey. International Conference on Power Systems, ICPS 2007.

TÜMAY M., KAPLAN Y. A., TEKE A., MERAL M. E., BAYINDIR K. Ç., CUMA M. U., SARIBULUT L., PSCAD Modeling of Custom Power Park for Power Quality. 5th International Conference on Electrical Engineering 27 - 29 October 2008, Batna University, Avenue Boukhlouf Hadi 05000, Batna, ALGERIA

TAN A., ġENSES M. O., TEKE A., MERAL M. E., BAYINDIR K. Ç., TÜMAY M., Ġnternet Tabanlı Elektrik Enerjisi ve Güç Kalitesi Ġzleme Sistemi. 3. Enerji Verimliliği ve Kalitesi Sempozyumu Bildiri Kitabı, sayfa 286-290, Kocaeli, Mayıs 2009.