© SUPER PRODUCTS LLC 2010
Super Products LLC
17000 W. Cleveland Avenue, New Berlin, WI 53151 USA
P: 262.784.7100 F: 262.784.9561 E: info@superproductscorp.com
Super Products LLC reserves the right to make changes or amend any of the information contained in this publication without prior notice.
EASY TO OPERATE. EASY TO CLEAN. EASY TO MAINTAIN.
800.837.9711 • www.superproductscorp.com
CAMEL’S UNIQUE
FEATURES INCREASE
PRODUCTIVITY,
CONVENIENCE AND
COST SAVINGS
From its patented ejector plate unloading and dewatering system to its water recycling capability, Super Products’ Camel sewer and catch basin cleaner is truly unlike any other combination unit on the market today!
Camel Product Demonstration Video Available! View or request your copy today at:
www.cameleasy.com
Ejector Plate Unloading
Only Camel®offers Super Products’
patented ejector plate unloading system. A safe, easy-to-use and maintenance-free unloading system, the ejector plate scrapes the body clean for fast, thorough debris removal and washdowns. And since there’s no need to raise the collector body to unload, debris removal can be done in areas where a traditional dump body may be limited due to overhead obstructions or unstable ground.
Super Pak Dewatering System
Camel’s Super Pak dewatering system can increase on-the-job productivity while reducing time and costs associ-ated with debris removal.
Utilizing this material and water sepa-ration process, operators can easily move the ejector plate to speed up the draining process and squeeze out up to 98 percent of the liquid through a 6" drain located on the collector body. The increase in debris capacity that results can lower operating fuel costs as fewer trips to the dump site will be needed. And the drier loads are less messy to remove than those with a traditional dump body unit.
Water Recycling System . . . Go Green and Save!
Save time and cost associated with replenishing your water supply with Camel’s water recycling system. Super Products was the first to offer a combination sewer cleaner with wastewater recycling capability and it’s still the best system available today.
Simply fill the system with fresh water and, true to its name, the environmen-tally friendly Camel will allow you to work all day without the need to replenish your water supply.
Camel Jet®Water Jetting System
An affordable and valuable addition to any fleet, our Camel Jet high-pressure water jetting system is effective for keeping municipal sewers, sanitary and storm sewer lines, laterals, and drainage lines clean and free flowing.
Since 1972 Super Products has been committed to providing customers with outstanding service every step of the way – from helping them select the best equipment for their specific needs; to providing ongoing product training and technical assistance; to offering a wide selection of parts and accessories to minimize equipment downtime. And while we’re proud of the reputation that the company has built over the years, our team is committed to doing whatever it takes to continue to provide our customers with the service they’ve come to expect from Super Products.
Distributor Network
As well as having an experienced customer service team operating out of our Wisconsin-based headquarters, Super Products has a well-established network of distributors and representatives throughout the United States to support our customers serving municipalities. International representatives are also in place to serve customers worldwide.
VISIT OUR WEBSITE TO EASILY LOCATE THE DISTRIBUTOR COVERING YOUR AREA
800.837.9711
•www.superproductscorp.com
Mud Dog®Hydro Excavators
A safe and effective alternative to traditional digging equipment, our Mud Dog units offer heavy-duty construction, proven performance in extreme conditions and our patented ejector plate unloading technology.
Super Products offers on-site demonstrations as a convenient, cost-effective way for customers to
experience the Camel first hand.
Supersucker®Vacuum Trucks
Only Super Products offers the original Supersucker vacuum truck. Ideal for industrial and environmental cleanups, this unit is easy to use and offers high-power suction to pneumatically convey solids, liquids, sludges or slurries.
IN ADDITION TO ITS CAMEL COMBINATION SEWER CLEANERS, SUPER PRODUCTS’ PRODUCT LINE INCLUDES:
COMMITTED TO CUSTOMER SERVICE... YESTERDAY, TODAY AND TOMORROW
Your authorized Super Products representative
Since Super Products first introduced the Camel in 1976, municipalities and sewer contractors world wide have made it the combination unit they rely on for a wide variety of jobs – from routine sewer line maintenance to emergency response overflow situations. In addition to offering the performance to complete the toughest jobs, our Camel sewer and catch basin cleaners are easy to operate and require virtually no maintenance.
DISCOVER HOW THE CAMEL
®CAN MAKE YOUR JOB EASIER
n Single control panel set up makes for a simple operation sequence that even your newest employees can quickly learn
n Patented ejector plate technology scrapes the body clean for fast, thorough debris unloading and wash-downs; innovative dewatering system results in dryer loads, fewer trips to the dump and reduced disposal costs
n Single engine design lowers fuel costs, maintenance requirements and sound levels
n Industry’s original wastewater recycling system reduces time and costs associated with replenishing fresh water supply as well as makes the unit environmentally friendly
n CAN bus wiring allows for quick, easy troubleshooting to reduce downtime
Unique Ejector Plate Unloading!
The Camel is the industry’s only combination unit that features Super Products’ patented ejector plate unloading system. This system safely and effectively removes all debris from the collector body with minimal cleanup, and an internal body flush-out system makes cleanup fast and easy at the dumpsite. To prevent over filling the collector body, an automatic stainless steel dual float ball system is in place.
For operators who prefer a dump body unit, the Camel is also available with the standard “tip-to-dump” method that raises the body up to a 50º angle with a telescopic hydraulic cylinder. All controls for discharging debris are located curbside of chassis cab
Super Pak Dewatering System
Coupled with the ejector plate technology, the Camel’s Super Pak dewatering and compaction system removes excess liquid through a 6" (152.4 mm) drain located on the front of the collector body
H I K L A B C E G J F H G C B F F K J I D A D E
The Camel is able to achieve maximum performance by offering water pressures up to 2500 PSI at 65-80 GPM and air flow to 5000 CFM/18 h. It is this powerful combination that enables the Camel to quickly and efficiently complete even the toughest of jobs. And while its performance is quite impressive, it is the Camel’s many other features that owners and operators have come to appreciate over the years.
Water Tanks
Constructed of 3/8" (9.5mm) rotationally-molded, non-cross linked polyethylene with ultraviolet stabilizer for strength and durability, the tanks offer capacity up to 1500 gallons (5,677L) of water
Storage Boxes
Customize your own storage for tools and accessories with a wide selection of different sized storage boxes
CAN Bus Wiring
Simple CAN bus wiring system with LED digital display screen replaces individual analog wiring systems and offers quick, convenient troubleshooting to reduce vehicle downtime
Single Engine Design
Lower sound levels, reduced maintenance and less fuel consumption result from the Camel’s single engine design. This unique design also allows the vacuum, water and hydraulic pumps to operate efficiently while transmission is in NEUTRAL
Hose Reel
The Camel’s hose reel can be or mid-mounted on the unit. The front-mounted hose reel (as shown) offers manual 180º rotation and has capacity up to 1000' (304.8m) of 1" (25.4mm) hose. The mid-mounted hose reel, which can hold 600' (304.8m) of 1" (25.4mm) hose, features hose reel tensioning and automatic level wind system to make it the industry’s easiest reel to operate
Front Mounted Control Console
A front-mounted control console makes it easy and safe to operate many functions including the Camel’s water and vacuum pumps; PTO on/off switches; water flow control and pressure gauge; electronic engine throttle; reel directional valve and speed controls; and pendant and handgun connections. For even greater convenience, a wireless, remote control system is also available
Collector Body
The debris collector body is constructed of 1/4" (19mm) Exten high-strength, low-alloy, abrasion-resistant steel designed to withstand vacuum levels of 367" (93.22mm) of water.
Body sizes are available that offer debris capacities of 6.5 cu yd (4.9m3), 10.8 cu yd (8.2m3) and 16 cu yd (12.2m3)
Hydraulic Boom
The hydraulic boom is capable of 210° rotation, vertical lift up to 16' (4.88m) and lift-ing up to 1000 lbs. (454 kg). The 8" (203.22mm) I.D. vacuum system comes with a heavy-duty steel elbow. The 8' (2.44m) hydraulic telescopic boom offers a true “tube inside the tube” design for smooth and precise operation
Aluminum Tubing
Rugged aluminum tubing with available storage of up to 48' (14.6m) on rear door. Optional hydraulic fold down rack available
Tailgate
When closed, the tailgate is secured by a manual latch system or an optional hydraulic over-center latch system
B
C
L D
Camel’s Water System in Operation
Utilizing an exclusive Triplex water pump design, the Camel water system provides smooth-acting, surge-free flow and pressure for maximum cleaning performance as well as reducing fatigue on the water system itself.
Hydro Excavating Features Increase Camel’s Capabilities Several features are available that can turn the Camel into a powerful hydro excavating unit including water heaters, cartridge filters, dig tubes and specially-designed water lances. Coupled with the unit’s solid
water and vacuum performance, these features allow operators to safely and effectively expose utility lines, remove debris and clean out a variety of structures and potholes and dig in congested spaces, and perform many other hydro excavating applications.
DESIGNED AND CONSTRUCTED FOR MAXIMUM PERFORMANCE, CONVENIENCE AND COST SAVINGS
Flat Tailgate
Dual Stainless Steel Float Ball Shutoff
UNPARALLELED WATER & VACUUM SYSTEM DESIGN INNOVATIONS
Camel’s Vacuum System in Operation
Pioneered and developed by Super Products, the use of a posi-tive displacement vacuum pump ensures maximum vacuum and air flow at all engine speeds and allows material to be vacuumed above or below the surface. And with the high vacuum levels and CFM generated by the positive vacuum pump, no material is too deep or far away from the unit to convey.
For added versatility, the Camel offers three modes of conveying material
Air Conveyance – Like a centrifugal fan, the air conveyance mode moves material with air. With this method, air must be present to convey material.
Pure Vacuum – The pure vacuum mode moves material with vacuum similar to a vane-type pump used in septic tank units. This method moves material with pure vacuum.
Fluidizing Tube – A combination of both methods, the Fluidizing Tube removes material from beneath the liquid surface by pure vacuum, then injects air into the system to carry material into the collector body via air conveyance.
SUPER PRODUCTS ONLINE . . . A GREAT RESOURCE!
Visit our web site for even more information on our Camel product line including detailed specifications. And while there don’t forget to sign up for our Camel Chat newsletter, a valuable resource for those serving the sewer cleaning industry!
Camel’s Winter Recirculation Package Combats Destructive Power of Ice!
Brrrrrrrrrr. A visit from Old Man Winter can add up to an unwelcome equation: WATER + FREEZING TEMPERATURES = DOWNTIME. However, Camel users have an opportunity to be proactive and delete that equation from their cold weather experience.
That’s right. We want to take on your worst-case scenario projects. And Super Products is so confident that our Camel® will not only meet but exceed your expectations that we’re inviting you to schedule an on-site demonstration where we’ll put the Camel to work for you. Whether a 60-foot lift station needs vacu-uming, work needs to be done 20 feet under water, grit chambers, bar screen areas, digesters, or drying beds at treat-ment plants need cleaning or overflow lines require attention, we’ll put the Camel to work while you watch. (Clint Long) During a demo you’ll witness first hand the effectiveness of the Camel’s perform-ance including its powerful positive displacement vacuum pump and its triplex water system that provides smooth, continuous flow return.
You will also be able to see how its unique ejector plate provides simple, thorough unloading to make your job much easier. Super Products will send a Camel unit to your location where our experienced
Dan “Koz” Koziczkowki Product Manager First off, that last name: Koziczkowski. Since it can be quite a mouthful for some, simply using “Koz” is fine with Dan, Super Products Product Manager and the voice behind Camel Chat. With almost 30 years of company experience, Dan’s product and application expertise enables him to offer insights and information to help readers understand and optimize the features of Super Products’ Camel. Dan began working in Super Products’ sub-assembly area in 1981. After building power units for the Camel, control cabinets for Camels and Supersuckers, and sub-assemblies for both products, he became a Technical Representative in 1983. The assignment gave him the opportunity to conduct product demonstrations, training and maintenance support for the Camel and Supersucker product lines throughout the United States, Canada and Mexico. Having gained a wealth of experience apply-ing the products in unique and challengapply-ing situations, Dan was well equipped to take on the role of Inside Sales Manager in 1987. A three-year assignment as Parts and Service Manager in the mid- 90’s provided Dan with a deeper understanding of the product and users’ needs and earned him the role of Team Sales Manager in 1999. Dan was recently promoted to the newly-created role of Product Manager. And while he’ll continue to oversee Camel products and work closely with our dealer network to serve customers, Dan will also now focus on expanding the company’s line of Super-sucker® industrial vacuum loaders and Mud Dog® hydro excavators. Feel free to contact Dan as he looks forward to serving you in the future! operators will demonstrate the full cycle of the unit’s operation including filling it with water, cleaning your selected site, dumping the debris tank and washing down the unit. They’ll also cover other benefits you’ll find quite valuable such as explaining the fuel cost savings of using this single-engine machine.
An on-site demo provides a convenient, cost-effective way for you to witness a Camel in operation while working on your most challenging cleaning projects.
So don’t miss the opportunity for your team to experience first hand the Camel’s performance and productivity enhancing capabilities. Visit www.cameleasy.com or call 800.837.9711 today to schedule your free demonstration.
CHALLENGE THE CAMEL!
PAGE 2 PAGE 3
CHALLENGE THE CAMEL! M E E T T H E T E A M
Not only have our Camel units evolved over the years, so has our promotional material. And while the look of our ads has changed, the basic message conveyed has remained the same. Check out our popular “Gator” Camel ad currently appearing in “Cleaner” and “Municipal Sewer & Water” magazines.
Participants closely inspect the Camel’s unique ejector plate at a recent demo.
CLASSIC CAMEL CURRENT CAMEL
Super Products’ demo operators will come to your location to take on the nastiest, toughest projects
See our Camel at this Year’s Show! February 25th – 27th.
Super Products Booth #1054
When temperatures dip below freezing, leaving water in Camel units can pose a risk. Although this may not be a concern if the unit is parked in a heated structure, parking it outside in the cold sets the stage for problems. Regardless of the brand, water pumps can be destroyed by cold weather: steel literally split wide open; crank shafts pushed out the pump casing; and plumbing systems destroyed. There are a couple of ways to protect the Camel without having to build a dedicated parking structure. Super Products offers a winter recirculation package on Camel combination units. By simply connecting the end of the sewer hose to a fitting and turning a ball valve, the water system can be operated while driving down the road. This keeps the water moving continuously throughout the entire system to prevent it from freezing. And there are no limitations to road speed with the system. Another way the Camel can combat the cold is with its air purge system. This system is designed to completely blow out the water system utilizing the chassis air. Just plug the air purge valve into the connection on the water system and completely blow down the system. The average operator can complete this procedure in 20 minutes or less at the end of the day and then the unit can safely be stored outside in freezing temperatures. The Camel also features an antifreeze injection system that can prevent the unit from freezing. (Randy Lyons) After drain-ing the water system at the end of the day, the entire water system including the pump, plumbing and sewer hose can be filled with antifreeze. The next morning simply use the air purge system to blow the antifreeze back into its holding tank.
By choosing Super Products’ winter recirculation package, air purge system, or the antifreeze injection option, Camel users can protect themselves from Old Man Winter’s mathematical mayhem.
Camel Chat Sharing Super Solutions for the Sewer Cleaning Industry
WINTER 2010
SUPER PRODUCTS LLC
CAMEL CHAT DEBUTS!
Greetings and welcome to the first issue of Camel Chat, a new quarterly newsletter focused on providing read-ers with useful information on our Camel sewer & catch basin cleaners as well as solutions to everyday sewer cleaning challenges. I hope you find reading it enjoyable and valuable, and I welcome your feedback or topic suggestions to cover in future issues. Dan Koziczkowski 800.837.9711 (ext. 230) dkoz@superproductscorp.com (Just who is Dan? Find out on page 3.)
Recognizing the power of vacuum technology led Super Products to design the Camel®Sewer & Catch Basin Cleaner. Founded in 1972, Wisconsin-based Super Products introduced its first Supersucker®industrial vacuum truck the very next year – March of 1973 to be exact. At that time, the company was a pioneer in producing an industrial vacuum loader with a positive displacement vacuum pump. Looking to expand its product offer -ing to the sewer clean-ing industry, Super Products’ first combination unit, later trademarked the “Camel,” was designed in March of 1976, and the first unit made its debut at the American Public Works Association (APWA) Show later that year. Several Supersucker features were incorporated into the design of the first Camel, including the positive displacement vacuum pump that utilized the truck engine as a power source and a bag house filter system. (Bill Crank) The original Camels adopted several concepts from the garbage packer industry including rec-tangular bodies and a pusher plate for ejecting material out of the body. The first Camels also included a patented water recycling system, whereby vacuumed sewer water was cleaned and returned to the fresh water tank to replenish the supply for additional sewer cleaning.
Since this unique sewer and catch basis cleaner could be filled with fresh water at the beginning of the day and work all day without replenishing its water supply, it earned the name “Camel.”
While many of the improvements made to the Camel over the years, such as the move from a rectangular body to a round debris body, were the result of the changing times and techno-logical advancements, others were based off the suggestions from Super Products’ dealers, customers and demostration unit operators. Since the Camel was introduced 34 years ago as the first combina-tion unit to feature a positive displacement vacuum system and water recycling technology, it has earned a solid reputation for reliability and exceptional performance. Innovative Product Design and Engineering Result in the Birth of the Camel and Its Unique Features
Today’s sleek looking Camel still offers many of the unique features that were found on the original model nearly four decades ago.
Since Super Products first introduced the Camel in 1976, municipalities and sewer contractors world wide have made it the combination unit they rely on for a wide variety of jobs – from routine sewer line maintenance to emergency response overflow situations. In addition to offering the performance to complete the toughest jobs, our Camel sewer and catch basin cleaners are easy to operate and require virtually no maintenance.
DISCOVER HOW THE CAMEL
®CAN MAKE YOUR JOB EASIER
n Single control panel set up makes for a simple operation sequence that even your newest employees can quickly learn
n Patented ejector plate technology scrapes the body clean for fast, thorough debris unloading and wash-downs; innovative dewatering system results in dryer loads, fewer trips to the dump and reduced disposal costs
n Single engine design lowers fuel costs, maintenance requirements and sound levels
n Industry’s original wastewater recycling system reduces time and costs associated with replenishing fresh water supply as well as makes the unit environmentally friendly
n CAN bus wiring allows for quick, easy troubleshooting to reduce downtime
Unique Ejector Plate Unloading!
The Camel is the industry’s only combination unit that features Super Products’ patented ejector plate unloading system. This system safely and effectively removes all debris from the collector body with minimal cleanup, and an internal body flush-out system makes cleanup fast and easy at the dumpsite. To prevent over filling the collector body, an automatic stainless steel dual float ball system is in place.
For operators who prefer a dump body unit, the Camel is also available with the standard “tip-to-dump” method that raises the body up to a 50º angle with a telescopic hydraulic cylinder. All controls for discharging debris are located curbside of chassis cab
Super Pak Dewatering System
Coupled with the ejector plate technology, the Camel’s Super Pak dewatering and compaction system removes excess liquid through a 6" (152.4 mm) drain located on the front of the collector body
H I K L A B C E G J F H G C B F F K J I D A D E
The Camel is able to achieve maximum performance by offering water pressures up to 2500 PSI at 65-80 GPM and air flow to 5000 CFM/18 h. It is this powerful combination that enables the Camel to quickly and efficiently complete even the toughest of jobs. And while its performance is quite impressive, it is the Camel’s many other features that owners and operators have come to appreciate over the years.
Water Tanks
Constructed of 3/8" (9.5mm) rotationally-molded, non-cross linked polyethylene with ultraviolet stabilizer for strength and durability, the tanks offer capacity up to 1500 gallons (5,677L) of water
Storage Boxes
Customize your own storage for tools and accessories with a wide selection of different sized storage boxes
CAN Bus Wiring
Simple CAN bus wiring system with LED digital display screen replaces individual analog wiring systems and offers quick, convenient troubleshooting to reduce vehicle downtime
Single Engine Design
Lower sound levels, reduced maintenance and less fuel consumption result from the Camel’s single engine design. This unique design also allows the vacuum, water and hydraulic pumps to operate efficiently while transmission is in NEUTRAL
Hose Reel
The Camel’s hose reel can be or mid-mounted on the unit. The front-mounted hose reel (as shown) offers manual 180º rotation and has capacity up to 1000' (304.8m) of 1" (25.4mm) hose. The mid-mounted hose reel, which can hold 600' (304.8m) of 1" (25.4mm) hose, features hose reel tensioning and automatic level wind system to make it the industry’s easiest reel to operate
Front Mounted Control Console
A front-mounted control console makes it easy and safe to operate many functions including the Camel’s water and vacuum pumps; PTO on/off switches; water flow control and pressure gauge; electronic engine throttle; reel directional valve and speed controls; and pendant and handgun connections. For even greater convenience, a wireless, remote control system is also available
Collector Body
The debris collector body is constructed of 1/4" (19mm) Exten high-strength, low-alloy, abrasion-resistant steel designed to withstand vacuum levels of 367" (93.22mm) of water.
Body sizes are available that offer debris capacities of 6.5 cu yd (4.9m3), 10.8 cu yd (8.2m3) and 16 cu yd (12.2m3)
Hydraulic Boom
The hydraulic boom is capable of 210° rotation, vertical lift up to 16' (4.88m) and lift-ing up to 1000 lbs. (454 kg). The 8" (203.22mm) I.D. vacuum system comes with a heavy-duty steel elbow. The 8' (2.44m) hydraulic telescopic boom offers a true “tube inside the tube” design for smooth and precise operation
Aluminum Tubing
Rugged aluminum tubing with available storage of up to 48' (14.6m) on rear door. Optional hydraulic fold down rack available
Tailgate
When closed, the tailgate is secured by a manual latch system or an optional hydraulic over-center latch system
B
C
L D
Camel’s Water System in Operation
Utilizing an exclusive Triplex water pump design, the Camel water system provides smooth-acting, surge-free flow and pressure for maximum cleaning performance as well as reducing fatigue on the water system itself.
Hydro Excavating Features Increase Camel’s Capabilities Several features are available that can turn the Camel into a powerful hydro excavating unit including water heaters, cartridge filters, dig tubes and specially-designed water lances. Coupled with the unit’s solid
water and vacuum performance, these features allow operators to safely and effectively expose utility lines, remove debris and clean out a variety of structures and potholes and dig in congested spaces, and perform many other hydro excavating applications.
DESIGNED AND CONSTRUCTED FOR MAXIMUM PERFORMANCE, CONVENIENCE AND COST SAVINGS
Flat Tailgate
Dual Stainless Steel Float Ball Shutoff
UNPARALLELED WATER & VACUUM SYSTEM DESIGN INNOVATIONS
Camel’s Vacuum System in Operation
Pioneered and developed by Super Products, the use of a posi-tive displacement vacuum pump ensures maximum vacuum and air flow at all engine speeds and allows material to be vacuumed above or below the surface. And with the high vacuum levels and CFM generated by the positive vacuum pump, no material is too deep or far away from the unit to convey.
For added versatility, the Camel offers three modes of conveying material
Air Conveyance – Like a centrifugal fan, the air conveyance mode moves material with air. With this method, air must be present to convey material.
Pure Vacuum – The pure vacuum mode moves material with vacuum similar to a vane-type pump used in septic tank units. This method moves material with pure vacuum.
Fluidizing Tube – A combination of both methods, the Fluidizing Tube removes material from beneath the liquid surface by pure vacuum, then injects air into the system to carry material into the collector body via air conveyance.
SUPER PRODUCTS ONLINE . . . A GREAT RESOURCE!
Visit our web site for even more information on our Camel product line including detailed specifications. And while there don’t forget to sign up for our Camel Chat newsletter, a valuable resource for those serving the sewer cleaning industry!
Camel’s Winter Recirculation Package Combats Destructive Power of Ice!
Brrrrrrrrrr. A visit from Old Man Winter can add up to an unwelcome equation: WATER + FREEZING TEMPERATURES = DOWNTIME. However, Camel users have an opportunity to be proactive and delete that equation from their cold weather experience.
That’s right. We want to take on your worst-case scenario projects. And Super Products is so confident that our Camel® will not only meet but exceed your expectations that we’re inviting you to schedule an on-site demonstration where we’ll put the Camel to work for you. Whether a 60-foot lift station needs vacu-uming, work needs to be done 20 feet under water, grit chambers, bar screen areas, digesters, or drying beds at treat-ment plants need cleaning or overflow lines require attention, we’ll put the Camel to work while you watch. (Clint Long) During a demo you’ll witness first hand the effectiveness of the Camel’s perform-ance including its powerful positive displacement vacuum pump and its triplex water system that provides smooth, continuous flow return.
You will also be able to see how its unique ejector plate provides simple, thorough unloading to make your job much easier. Super Products will send a Camel unit to your location where our experienced
Dan “Koz” Koziczkowki Product Manager First off, that last name: Koziczkowski. Since it can be quite a mouthful for some, simply using “Koz” is fine with Dan, Super Products Product Manager and the voice behind Camel Chat. With almost 30 years of company experience, Dan’s product and application expertise enables him to offer insights and information to help readers understand and optimize the features of Super Products’ Camel. Dan began working in Super Products’ sub-assembly area in 1981. After building power units for the Camel, control cabinets for Camels and Supersuckers, and sub-assemblies for both products, he became a Technical Representative in 1983. The assignment gave him the opportunity to conduct product demonstrations, training and maintenance support for the Camel and Supersucker product lines throughout the United States, Canada and Mexico. Having gained a wealth of experience apply-ing the products in unique and challengapply-ing situations, Dan was well equipped to take on the role of Inside Sales Manager in 1987. A three-year assignment as Parts and Service Manager in the mid- 90’s provided Dan with a deeper understanding of the product and users’ needs and earned him the role of Team Sales Manager in 1999. Dan was recently promoted to the newly-created role of Product Manager. And while he’ll continue to oversee Camel products and work closely with our dealer network to serve customers, Dan will also now focus on expanding the company’s line of Super-sucker® industrial vacuum loaders and Mud Dog® hydro excavators. Feel free to contact Dan as he looks forward to serving you in the future! operators will demonstrate the full cycle of the unit’s operation including filling it with water, cleaning your selected site, dumping the debris tank and washing down the unit. They’ll also cover other benefits you’ll find quite valuable such as explaining the fuel cost savings of using this single-engine machine.
An on-site demo provides a convenient, cost-effective way for you to witness a Camel in operation while working on your most challenging cleaning projects.
So don’t miss the opportunity for your team to experience first hand the Camel’s performance and productivity enhancing capabilities. Visit www.cameleasy.com or call 800.837.9711 today to schedule your free demonstration.
CHALLENGE THE CAMEL!
PAGE 2 PAGE 3
CHALLENGE THE CAMEL! M E E T T H E T E A M
Not only have our Camel units evolved over the years, so has our promotional material. And while the look of our ads has changed, the basic message conveyed has remained the same. Check out our popular “Gator” Camel ad currently appearing in “Cleaner” and “Municipal Sewer & Water” magazines.
Participants closely inspect the Camel’s unique ejector plate at a recent demo.
CLASSIC CAMEL CURRENT CAMEL
Super Products’ demo operators will come to your location to take on the nastiest, toughest projects
See our Camel at this Year’s Show! February 25th – 27th.
Super Products Booth #1054
When temperatures dip below freezing, leaving water in Camel units can pose a risk. Although this may not be a concern if the unit is parked in a heated structure, parking it outside in the cold sets the stage for problems. Regardless of the brand, water pumps can be destroyed by cold weather: steel literally split wide open; crank shafts pushed out the pump casing; and plumbing systems destroyed. There are a couple of ways to protect the Camel without having to build a dedicated parking structure. Super Products offers a winter recirculation package on Camel combination units. By simply connecting the end of the sewer hose to a fitting and turning a ball valve, the water system can be operated while driving down the road. This keeps the water moving continuously throughout the entire system to prevent it from freezing. And there are no limitations to road speed with the system. Another way the Camel can combat the cold is with its air purge system. This system is designed to completely blow out the water system utilizing the chassis air. Just plug the air purge valve into the connection on the water system and completely blow down the system. The average operator can complete this procedure in 20 minutes or less at the end of the day and then the unit can safely be stored outside in freezing temperatures. The Camel also features an antifreeze injection system that can prevent the unit from freezing. (Randy Lyons) After drain-ing the water system at the end of the day, the entire water system including the pump, plumbing and sewer hose can be filled with antifreeze. The next morning simply use the air purge system to blow the antifreeze back into its holding tank.
By choosing Super Products’ winter recirculation package, air purge system, or the antifreeze injection option, Camel users can protect themselves from Old Man Winter’s mathematical mayhem.
Camel Chat Sharing Super Solutions for the Sewer Cleaning Industry
WINTER 2010
SUPER PRODUCTS LLC
CAMEL CHAT DEBUTS!
Greetings and welcome to the first issue of Camel Chat, a new quarterly newsletter focused on providing read-ers with useful information on our Camel sewer & catch basin cleaners as well as solutions to everyday sewer cleaning challenges. I hope you find reading it enjoyable and valuable, and I welcome your feedback or topic suggestions to cover in future issues. Dan Koziczkowski 800.837.9711 (ext. 230) dkoz@superproductscorp.com (Just who is Dan? Find out on page 3.)
Recognizing the power of vacuum technology led Super Products to design the Camel®Sewer & Catch Basin Cleaner. Founded in 1972, Wisconsin-based Super Products introduced its first Supersucker®industrial vacuum truck the very next year – March of 1973 to be exact. At that time, the company was a pioneer in producing an industrial vacuum loader with a positive displacement vacuum pump. Looking to expand its product offer -ing to the sewer clean-ing industry, Super Products’ first combination unit, later trademarked the “Camel,” was designed in March of 1976, and the first unit made its debut at the American Public Works Association (APWA) Show later that year. Several Supersucker features were incorporated into the design of the first Camel, including the positive displacement vacuum pump that utilized the truck engine as a power source and a bag house filter system. (Bill Crank) The original Camels adopted several concepts from the garbage packer industry including rec-tangular bodies and a pusher plate for ejecting material out of the body. The first Camels also included a patented water recycling system, whereby vacuumed sewer water was cleaned and returned to the fresh water tank to replenish the supply for additional sewer cleaning.
Since this unique sewer and catch basis cleaner could be filled with fresh water at the beginning of the day and work all day without replenishing its water supply, it earned the name “Camel.”
While many of the improvements made to the Camel over the years, such as the move from a rectangular body to a round debris body, were the result of the changing times and techno-logical advancements, others were based off the suggestions from Super Products’ dealers, customers and demostration unit operators. Since the Camel was introduced 34 years ago as the first combina-tion unit to feature a positive displacement vacuum system and water recycling technology, it has earned a solid reputation for reliability and exceptional performance. Innovative Product Design and Engineering Result in the Birth of the Camel and Its Unique Features
Today’s sleek looking Camel still offers many of the unique features that were found on the original model nearly four decades ago.
www.cameleasy.com
Since Super Products first introduced the Camel in 1976, municipalities and sewer contractors world wide have made it the combination unit they rely on for a wide variety of jobs – from routine sewer line maintenance to emergency response overflow situations. In addition to offering the performance to complete the toughest jobs, our Camel sewer and catch basin cleaners are easy to operate and require virtually no maintenance.
DISCOVER HOW THE CAMEL
®CAN MAKE YOUR JOB EASIER
n Single control panel set up makes for a simple operation sequence that even your newest employees can quickly learn
n Patented ejector plate technology scrapes the body clean for fast, thorough debris unloading and wash-downs; innovative dewatering system results in dryer loads, fewer trips to the dump and reduced disposal costs
n Single engine design lowers fuel costs, maintenance requirements and sound levels
n Industry’s original wastewater recycling system reduces time and costs associated with replenishing fresh water supply as well as makes the unit environmentally friendly
n CAN bus wiring allows for quick, easy troubleshooting to reduce downtime
Unique Ejector Plate Unloading!
The Camel is the industry’s only combination unit that features Super Products’ patented ejector plate unloading system. This system safely and effectively removes all debris from the collector body with minimal cleanup, and an internal body flush-out system makes cleanup fast and easy at the dumpsite. To prevent over filling the collector body, an automatic stainless steel dual float ball system is in place.
For operators who prefer a dump body unit, the Camel is also available with the standard “tip-to-dump” method that raises the body up to a 50º angle with a telescopic hydraulic cylinder. All controls for discharging debris are located curbside of chassis cab
Super Pak Dewatering System
Coupled with the ejector plate technology, the Camel’s Super Pak dewatering and compaction system removes excess liquid through a 6" (152.4 mm) drain located on the front of the collector body
H I K L A B C E G J F H G C B F F K J I D A D E
The Camel is able to achieve maximum performance by offering water pressures up to 2500 PSI at 65-80 GPM and air flow to 5000 CFM/18 h. It is this powerful combination that enables the Camel to quickly and efficiently complete even the toughest of jobs. And while its performance is quite impressive, it is the Camel’s many other features that owners and operators have come to appreciate over the years.
Water Tanks
Constructed of 3/8" (9.5mm) rotationally-molded, non-cross linked polyethylene with ultraviolet stabilizer for strength and durability, the tanks offer capacity up to 1500 gallons (5,677L) of water
Storage Boxes
Customize your own storage for tools and accessories with a wide selection of different sized storage boxes
CAN Bus Wiring
Simple CAN bus wiring system with LED digital display screen replaces individual analog wiring systems and offers quick, convenient troubleshooting to reduce vehicle downtime
Single Engine Design
Lower sound levels, reduced maintenance and less fuel consumption result from the Camel’s single engine design. This unique design also allows the vacuum, water and hydraulic pumps to operate efficiently while transmission is in NEUTRAL
Hose Reel
The Camel’s hose reel can be or mid-mounted on the unit. The front-mounted hose reel (as shown) offers manual 180º rotation and has capacity up to 1000' (304.8m) of 1" (25.4mm) hose. The mid-mounted hose reel, which can hold 600' (304.8m) of 1" (25.4mm) hose, features hose reel tensioning and automatic level wind system to make it the industry’s easiest reel to operate
Front Mounted Control Console
A front-mounted control console makes it easy and safe to operate many functions including the Camel’s water and vacuum pumps; PTO on/off switches; water flow control and pressure gauge; electronic engine throttle; reel directional valve and speed controls; and pendant and handgun connections. For even greater convenience, a wireless, remote control system is also available
Collector Body
The debris collector body is constructed of 1/4" (19mm) Exten high-strength, low-alloy, abrasion-resistant steel designed to withstand vacuum levels of 367" (93.22mm) of water.
Body sizes are available that offer debris capacities of 6.5 cu yd (4.9m3), 10.8 cu yd (8.2m3) and 16 cu yd (12.2m3)
Hydraulic Boom
The hydraulic boom is capable of 210° rotation, vertical lift up to 16' (4.88m) and lift-ing up to 1000 lbs. (454 kg). The 8" (203.22mm) I.D. vacuum system comes with a heavy-duty steel elbow. The 8' (2.44m) hydraulic telescopic boom offers a true “tube inside the tube” design for smooth and precise operation
Aluminum Tubing
Rugged aluminum tubing with available storage of up to 48' (14.6m) on rear door. Optional hydraulic fold down rack available
Tailgate
When closed, the tailgate is secured by a manual latch system or an optional hydraulic over-center latch system
B
C
L D
Camel’s Water System in Operation
Utilizing an exclusive Triplex water pump design, the Camel water system provides smooth-acting, surge-free flow and pressure for maximum cleaning performance as well as reducing fatigue on the water system itself.
Hydro Excavating Features Increase Camel’s Capabilities Several features are available that can turn the Camel into a powerful hydro excavating unit including water heaters, cartridge filters, dig tubes and specially-designed water lances. Coupled with the unit’s solid
water and vacuum performance, these features allow operators to safely and effectively expose utility lines, remove debris and clean out a variety of structures and potholes and dig in congested spaces, and perform many other hydro excavating applications.
DESIGNED AND CONSTRUCTED FOR MAXIMUM PERFORMANCE, CONVENIENCE AND COST SAVINGS
Flat Tailgate
Dual Stainless Steel Float Ball Shutoff
UNPARALLELED WATER & VACUUM SYSTEM DESIGN INNOVATIONS
Camel’s Vacuum System in Operation
Pioneered and developed by Super Products, the use of a posi-tive displacement vacuum pump ensures maximum vacuum and air flow at all engine speeds and allows material to be vacuumed above or below the surface. And with the high vacuum levels and CFM generated by the positive vacuum pump, no material is too deep or far away from the unit to convey.
For added versatility, the Camel offers three modes of conveying material
Air Conveyance – Like a centrifugal fan, the air conveyance mode moves material with air. With this method, air must be present to convey material.
Pure Vacuum – The pure vacuum mode moves material with vacuum similar to a vane-type pump used in septic tank units. This method moves material with pure vacuum.
Fluidizing Tube – A combination of both methods, the Fluidizing Tube removes material from beneath the liquid surface by pure vacuum, then injects air into the system to carry material into the collector body via air conveyance.
SUPER PRODUCTS ONLINE . . . A GREAT RESOURCE!
Visit our web site for even more information on our Camel product line including detailed specifications. And while there don’t forget to sign up for our Camel Chat newsletter, a valuable resource for those serving the sewer cleaning industry!
Camel’s Winter Recirculation Package Combats Destructive Power of Ice!
Brrrrrrrrrr. A visit from Old Man Winter can add up to an unwelcome equation: WATER + FREEZING TEMPERATURES = DOWNTIME. However, Camel users have an opportunity to be proactive and delete that equation from their cold weather experience.
That’s right. We want to take on your worst-case scenario projects. And Super Products is so confident that our Camel® will not only meet but exceed your expectations that we’re inviting you to schedule an on-site demonstration where we’ll put the Camel to work for you. Whether a 60-foot lift station needs vacu-uming, work needs to be done 20 feet under water, grit chambers, bar screen areas, digesters, or drying beds at treat-ment plants need cleaning or overflow lines require attention, we’ll put the Camel to work while you watch. (Clint Long) During a demo you’ll witness first hand the effectiveness of the Camel’s perform-ance including its powerful positive displacement vacuum pump and its triplex water system that provides smooth, continuous flow return.
You will also be able to see how its unique ejector plate provides simple, thorough unloading to make your job much easier. Super Products will send a Camel unit to your location where our experienced
Dan “Koz” Koziczkowki Product Manager First off, that last name: Koziczkowski. Since it can be quite a mouthful for some, simply using “Koz” is fine with Dan, Super Products Product Manager and the voice behind Camel Chat. With almost 30 years of company experience, Dan’s product and application expertise enables him to offer insights and information to help readers understand and optimize the features of Super Products’ Camel. Dan began working in Super Products’ sub-assembly area in 1981. After building power units for the Camel, control cabinets for Camels and Supersuckers, and sub-assemblies for both products, he became a Technical Representative in 1983. The assignment gave him the opportunity to conduct product demonstrations, training and maintenance support for the Camel and Supersucker product lines throughout the United States, Canada and Mexico. Having gained a wealth of experience apply-ing the products in unique and challengapply-ing situations, Dan was well equipped to take on the role of Inside Sales Manager in 1987. A three-year assignment as Parts and Service Manager in the mid- 90’s provided Dan with a deeper understanding of the product and users’ needs and earned him the role of Team Sales Manager in 1999. Dan was recently promoted to the newly-created role of Product Manager. And while he’ll continue to oversee Camel products and work closely with our dealer network to serve customers, Dan will also now focus on expanding the company’s line of Super-sucker® industrial vacuum loaders and Mud Dog® hydro excavators. Feel free to contact Dan as he looks forward to serving you in the future! operators will demonstrate the full cycle of the unit’s operation including filling it with water, cleaning your selected site, dumping the debris tank and washing down the unit. They’ll also cover other benefits you’ll find quite valuable such as explaining the fuel cost savings of using this single-engine machine.
An on-site demo provides a convenient, cost-effective way for you to witness a Camel in operation while working on your most challenging cleaning projects.
So don’t miss the opportunity for your team to experience first hand the Camel’s performance and productivity enhancing capabilities. Visit www.cameleasy.com or call 800.837.9711 today to schedule your free demonstration.
CHALLENGE THE CAMEL!
PAGE 2 PAGE 3
CHALLENGE THE CAMEL! M E E T T H E T E A M
Not only have our Camel units evolved over the years, so has our promotional material. And while the look of our ads has changed, the basic message conveyed has remained the same. Check out our popular “Gator” Camel ad currently appearing in “Cleaner” and “Municipal Sewer & Water” magazines.
Participants closely inspect the Camel’s unique ejector plate at a recent demo.
CLASSIC CAMEL CURRENT CAMEL
Super Products’ demo operators will come to your location to take on the nastiest, toughest projects
See our Camel at this Year’s Show! February 25th – 27th.
Super Products Booth #1054
When temperatures dip below freezing, leaving water in Camel units can pose a risk. Although this may not be a concern if the unit is parked in a heated structure, parking it outside in the cold sets the stage for problems. Regardless of the brand, water pumps can be destroyed by cold weather: steel literally split wide open; crank shafts pushed out the pump casing; and plumbing systems destroyed. There are a couple of ways to protect the Camel without having to build a dedicated parking structure. Super Products offers a winter recirculation package on Camel combination units. By simply connecting the end of the sewer hose to a fitting and turning a ball valve, the water system can be operated while driving down the road. This keeps the water moving continuously throughout the entire system to prevent it from freezing. And there are no limitations to road speed with the system. Another way the Camel can combat the cold is with its air purge system. This system is designed to completely blow out the water system utilizing the chassis air. Just plug the air purge valve into the connection on the water system and completely blow down the system. The average operator can complete this procedure in 20 minutes or less at the end of the day and then the unit can safely be stored outside in freezing temperatures. The Camel also features an antifreeze injection system that can prevent the unit from freezing. (Randy Lyons) After drain-ing the water system at the end of the day, the entire water system including the pump, plumbing and sewer hose can be filled with antifreeze. The next morning simply use the air purge system to blow the antifreeze back into its holding tank.
By choosing Super Products’ winter recirculation package, air purge system, or the antifreeze injection option, Camel users can protect themselves from Old Man Winter’s mathematical mayhem.
Camel Chat Sharing Super Solutions for the Sewer Cleaning Industry
WINTER 2010
SUPER PRODUCTS LLC
CAMEL CHAT DEBUTS!
Greetings and welcome to the first issue of Camel Chat, a new quarterly newsletter focused on providing read-ers with useful information on our Camel sewer & catch basin cleaners as well as solutions to everyday sewer cleaning challenges. I hope you find reading it enjoyable and valuable, and I welcome your feedback or topic suggestions to cover in future issues. Dan Koziczkowski 800.837.9711 (ext. 230) dkoz@superproductscorp.com (Just who is Dan? Find out on page 3.)
Recognizing the power of vacuum technology led Super Products to design the Camel®Sewer & Catch Basin Cleaner. Founded in 1972, Wisconsin-based Super Products introduced its first Supersucker®industrial vacuum truck the very next year – March of 1973 to be exact. At that time, the company was a pioneer in producing an industrial vacuum loader with a positive displacement vacuum pump. Looking to expand its product offer -ing to the sewer clean-ing industry, Super Products’ first combination unit, later trademarked the “Camel,” was designed in March of 1976, and the first unit made its debut at the American Public Works Association (APWA) Show later that year. Several Supersucker features were incorporated into the design of the first Camel, including the positive displacement vacuum pump that utilized the truck engine as a power source and a bag house filter system. (Bill Crank) The original Camels adopted several concepts from the garbage packer industry including rec-tangular bodies and a pusher plate for ejecting material out of the body. The first Camels also included a patented water recycling system, whereby vacuumed sewer water was cleaned and returned to the fresh water tank to replenish the supply for additional sewer cleaning.
Since this unique sewer and catch basis cleaner could be filled with fresh water at the beginning of the day and work all day without replenishing its water supply, it earned the name “Camel.”
While many of the improvements made to the Camel over the years, such as the move from a rectangular body to a round debris body, were the result of the changing times and techno-logical advancements, others were based off the suggestions from Super Products’ dealers, customers and demostration unit operators. Since the Camel was introduced 34 years ago as the first combina-tion unit to feature a positive displacement vacuum system and water recycling technology, it has earned a solid reputation for reliability and exceptional performance. Innovative Product Design and Engineering Result in the Birth of the Camel and Its Unique Features
Today’s sleek looking Camel still offers many of the unique features that were found on the original model nearly four decades ago.
© SUPER PRODUCTS LLC 2010
Super Products LLC
17000 W. Cleveland Avenue, New Berlin, WI 53151 USA
P: 262.784.7100 F: 262.784.9561 E: info@superproductscorp.com
Super Products LLC reserves the right to make changes or amend any of the information contained in this publication without prior notice.
EASY TO OPERATE. EASY TO CLEAN. EASY TO MAINTAIN.
800.837.9711 • www.superproductscorp.com
CAMEL’S UNIQUE
FEATURES INCREASE
PRODUCTIVITY,
CONVENIENCE AND
COST SAVINGS
From its patented ejector plate unloading and dewatering system to its water recycling capability, Super Products’ Camel sewer and catch basin cleaner is truly unlike any other combination unit on the market today!
Camel Product Demonstration Video Available! View or request your copy today at:
www.cameleasy.com
Ejector Plate Unloading
Only Camel®offers Super Products’
patented ejector plate unloading system. A safe, easy-to-use and maintenance-free unloading system, the ejector plate scrapes the body clean for fast, thorough debris removal and washdowns. And since there’s no need to raise the collector body to unload, debris removal can be done in areas where a traditional dump body may be limited due to overhead obstructions or unstable ground.
Super Pak Dewatering System
Camel’s Super Pak dewatering system can increase on-the-job productivity while reducing time and costs associ-ated with debris removal.
Utilizing this material and water sepa-ration process, operators can easily move the ejector plate to speed up the draining process and squeeze out up to 98 percent of the liquid through a 6" drain located on the collector body. The increase in debris capacity that results can lower operating fuel costs as fewer trips to the dump site will be needed. And the drier loads are less messy to remove than those with a traditional dump body unit.
Water Recycling System . . . Go Green and Save!
Save time and cost associated with replenishing your water supply with Camel’s water recycling system. Super Products was the first to offer a combination sewer cleaner with wastewater recycling capability and it’s still the best system available today.
Simply fill the system with fresh water and, true to its name, the environmen-tally friendly Camel will allow you to work all day without the need to replenish your water supply.
Camel Jet®Water Jetting System
An affordable and valuable addition to any fleet, our Camel Jet high-pressure water jetting system is effective for keeping municipal sewers, sanitary and storm sewer lines, laterals, and drainage lines clean and free flowing.
Since 1972 Super Products has been committed to providing customers with outstanding service every step of the way – from helping them select the best equipment for their specific needs; to providing ongoing product training and technical assistance; to offering a wide selection of parts and accessories to minimize equipment downtime. And while we’re proud of the reputation that the company has built over the years, our team is committed to doing whatever it takes to continue to provide our customers with the service they’ve come to expect from Super Products.
Distributor Network
As well as having an experienced customer service team operating out of our Wisconsin-based headquarters, Super Products has a well-established network of distributors and representatives throughout the United States to support our customers serving municipalities. International representatives are also in place to serve customers worldwide.
VISIT OUR WEBSITE TO EASILY LOCATE THE DISTRIBUTOR COVERING YOUR AREA
800.837.9711
•www.superproductscorp.com
Mud Dog®Hydro Excavators
A safe and effective alternative to traditional digging equipment, our Mud Dog units offer heavy-duty construction, proven performance in extreme conditions and our patented ejector plate unloading technology.
Super Products offers on-site demonstrations as a convenient, cost-effective way for customers to
experience the Camel first hand.
Supersucker®Vacuum Trucks
Only Super Products offers the original Supersucker vacuum truck. Ideal for industrial and environmental cleanups, this unit is easy to use and offers high-power suction to pneumatically convey solids, liquids, sludges or slurries.
IN ADDITION TO ITS CAMEL COMBINATION SEWER CLEANERS, SUPER PRODUCTS’ PRODUCT LINE INCLUDES:
COMMITTED TO CUSTOMER SERVICE... YESTERDAY, TODAY AND TOMORROW
Your authorized Super Products representative
© SUPER PRODUCTS LLC 2010
Super Products LLC
17000 W. Cleveland Avenue, New Berlin, WI 53151 USA
P: 262.784.7100 F: 262.784.9561 E: info@superproductscorp.com
Super Products LLC reserves the right to make changes or amend any of the information contained in this publication without prior notice.
EASY TO OPERATE. EASY TO CLEAN. EASY TO MAINTAIN.
800.837.9711 • www.superproductscorp.com
CAMEL’S UNIQUE
FEATURES INCREASE
PRODUCTIVITY,
CONVENIENCE AND
COST SAVINGS
From its patented ejector plate unloading and dewatering system to its water recycling capability, Super Products’ Camel sewer and catch basin cleaner is truly unlike any other combination unit on the market today!
Camel Product Demonstration Video Available! View or request your copy today at:
www.cameleasy.com
Ejector Plate Unloading
Only Camel®offers Super Products’
patented ejector plate unloading system. A safe, easy-to-use and maintenance-free unloading system, the ejector plate scrapes the body clean for fast, thorough debris removal and washdowns. And since there’s no need to raise the collector body to unload, debris removal can be done in areas where a traditional dump body may be limited due to overhead obstructions or unstable ground.
Super Pak Dewatering System
Camel’s Super Pak dewatering system can increase on-the-job productivity while reducing time and costs associ-ated with debris removal.
Utilizing this material and water sepa-ration process, operators can easily move the ejector plate to speed up the draining process and squeeze out up to 98 percent of the liquid through a 6" drain located on the collector body. The increase in debris capacity that results can lower operating fuel costs as fewer trips to the dump site will be needed. And the drier loads are less messy to remove than those with a traditional dump body unit.
Water Recycling System . . . Go Green and Save!
Save time and cost associated with replenishing your water supply with Camel’s water recycling system. Super Products was the first to offer a combination sewer cleaner with wastewater recycling capability and it’s still the best system available today.
Simply fill the system with fresh water and, true to its name, the environmen-tally friendly Camel will allow you to work all day without the need to replenish your water supply.
Camel Jet®Water Jetting System
An affordable and valuable addition to any fleet, our Camel Jet high-pressure water jetting system is effective for keeping municipal sewers, sanitary and storm sewer lines, laterals, and drainage lines clean and free flowing.
Since 1972 Super Products has been committed to providing customers with outstanding service every step of the way – from helping them select the best equipment for their specific needs; to providing ongoing product training and technical assistance; to offering a wide selection of parts and accessories to minimize equipment downtime. And while we’re proud of the reputation that the company has built over the years, our team is committed to doing whatever it takes to continue to provide our customers with the service they’ve come to expect from Super Products.
Distributor Network
As well as having an experienced customer service team operating out of our Wisconsin-based headquarters, Super Products has a well-established network of distributors and representatives throughout the United States to support our customers serving municipalities. International representatives are also in place to serve customers worldwide.
VISIT OUR WEBSITE TO EASILY LOCATE THE DISTRIBUTOR COVERING YOUR AREA
800.837.9711
•www.superproductscorp.com
Mud Dog®Hydro Excavators
A safe and effective alternative to traditional digging equipment, our Mud Dog units offer heavy-duty construction, proven performance in extreme conditions and our patented ejector plate unloading technology.
Super Products offers on-site demonstrations as a convenient, cost-effective way for customers to
experience the Camel first hand.
Supersucker®Vacuum Trucks
Only Super Products offers the original Supersucker vacuum truck. Ideal for industrial and environmental cleanups, this unit is easy to use and offers high-power suction to pneumatically convey solids, liquids, sludges or slurries.
